Skip to content

Install Milesight Occupancy Sensor WS202

Package contents

Before you begin to install the occupancy sensor WS202, you need to check the package contents to verify that you have received the items below.


1 ×  WS202 Sensor Wall Mounting Kits 1 × 3M Tape 1 × Quick Guide

Hardware overview

occupancy sensor hardware introduction

Note

Battery life: 3 years.

Install occupancy sensor WS202

Prerequisite

Before you start the installation, we recommend you to register the sensor to Yeastar Workplace.

Installation position

Install the Occupancy sensor under the desk, approximately 10 to 30 cm from the edge, at the center line of the desk.

Install the occupancy sensor WS202

  1. Paste 3M tape to the back of the sensor.
  2. Tear the other side and place it under a desk.
    Occupancy Sensor Installation 3M tape

Last update: October 17, 2022
Created: December 16, 2021

Author: cody