Upgrade LoRaWAN Gateway Firmware
This topic describes how to upgrade firmware for the Milesight LoRaWAN gateway.
- Supported model: Milesight UG65.
- The gateway is powered on and connected to the Internet.
Download the latest firmware.
- Go to Yeastar Firmware Download Center to check the new firmware.
- Click BIN beside the gateway to download the latest firmware.
Access the web interface of the gateway.
Enable Wireless Network Connection on your computer and search for access point
Gateway_******, then connect to the Wi-Fi.
Open a Web browser, and enter the IP address
192.168.1.1to access the gateway.
On the login page, enter the username and password, and click Login.
Forgot your password?
If you didn't set any new passwords, try the default login credential:
- Username: admin
- Password: password
Go to Maintenance > Upgrade.
Click Browse and select the firmware file.
Click Upgrade and the gateway will start to upgrade.
Any operation on the web page is not allowed during firmware upgrade, otherwise, the upgrade will be interrupted, or even the device will break down.
Wait for a few seconds, a result will be displayed on the web page.