Set up PBX as a TFTP Server

By setting up the TFTP feature, Yeastar P-Series Software Edition can work as a TFTP server, you can upload or download desired files to/from a specific PBX file folder (/ysdisk/tftpboot) via TFTP.

Procedure

  1. Log in to PBX web portal, go to System > Storage > File Sharing.
  2. Scroll down to the TFTP section, enable TFTP and click OK in the pop-up window.
  3. Click Save.

Result

The PBX can now be used as a TFTP server, you can upload or download desired files to/from the specific PBX file folder.

TFTP File Sharing examples

This section gives examples to show how to upload and download files in the specific PBX file holder using Tftpd64.
Configure a TFTP Client
  1. Download a Tftpd64 and run the software.
  2. On the top of the window, click Browse to select the storage path for the shared files.
  3. In the Server interface drop-down list, select the IP address of your computer.

Download a file from PBX
  1. In the Tftpd64, go to Tftp Client tab.
  2. In the Host field, enter the IP address of the PBX.
  3. In the Remote File field, enter the name of the desired file.
  4. Click Get to download the file.

Upload a file to PBX
  1. In the Tftpd64, go to Tftp Client.
  2. In the Host field, enter the IP address of the PBX.
  3. Click the beside the Local File field to select the desired file.
  4. Click Put to upload the file to the PBX.