IP Phone Auto Provisioning Options
Yeastar P-Series Software Edition provides a variety of Auto Provisioning options for IP phones that can meet general needs for end users. This topic introduces the settings that can be configured via Auto Provisioning.
General settings (preferences & codecs)
General settings provide the most common needs for extension users, such as phone language, date and time, etc. These settings can be auto provisioned by a template, so that the settings can be applied to multiple devices globally.
For more information, see Apply a New Template to a Provisioned IP Phone/Gateway.
Extension registration
An extension will be registered on the device after Auto Provisioning. If you change extension registration settings (such as registration password, registration name, SIP UDP/TCP port), you need to reprovision your devices.
- For IP phone: Only one extension can be assigned to a phone via Auto Provisioning.
- For DECT phone: Each handset registers with an extension via Auto Provisioning.
- Auto Provision IP Phones in Local Network (PnP Method)
- Auto Provision IP Phones in Local Network (DHCP Method)
- Auto Provision IP Phones Remotely (RPS FQDN Method)
- Auto Provision IP Phones Remotely (RPS Method)
- Auto Provision IP Phones Remotely (Provision Link - FQDN Method)
- Auto Provision IP Phones Remotely (Provision Link Method)
- Reassign an Extension to a Provisioned IP Phone/Gateway
Function key
Various function keys are available for you to customize for each extension user, such as BLF, speed dial, etc. The function keys are associated with extensions, and can be applied when auto provisioning phones.
For more information about the function keys, see Auto Provision Function Keys for Phones.
Device firmware
Yeastar P-Series Software Edition allows you to update the device firmware in bulk by Auto Provisioning.
For more information about firmware update, see Update Phone Firmware via Auto Provisioning.
Additional settings
In addition to the above settings, if you need to configure additional settings for the devices, you can also customize a template with additional parameters, and provision devices globally to apply the additional settings.
For more information, see Create a Custom Auto Provisioning Template.