Configure Network for Remote Web Access by a Yeastar FQDN

With a Yeastar FQDN, you can log in to the PBX web portal anywhere just like any website, without port forwarding. In this way, all the PBX remote web connections are HTTPS secured. This topic introduces how to configure network for remote web access via FQDN.

Procedure

  1. Log in to PBX web portal, go to System > Network > Yeastar FQDN.
  2. Turn on Yeastar FQDN.
  3. Set up the FQDN domain name.
    1. In the Fully Qualified Domain Name (FQDN) field, select a domain name, then enter a hostname.

      For example, select domain name ras.yeastar.com and enter hostname yeastardocs, you will get an FQDN yeastardocs.ras.yeastar.com.

      Note: Think twice before you enter the hostname. The FQDN cannot be changed after you save the configurations.

    2. Click Save.
  4. Optional: Configure remote web access permission.
    Note: By default, the super administrator account is restricted from using the remote web access feature.
    1. In the Features section, click beside the Web Access.
    2. In the pop-up window, complete the following settings according to your need.

      • Name: Display the remote access feature name, and cannot be edited.
      • Status: Enabled by default, and cannot be disabled.
      • Remote Access Service Port: Display the remote web access port 443. The port is assigned by Remote Access Service automatically.
      • Access Type: Define the account access restriction type for the feature.
        • Allowed Account: Only the selected accounts can get access to the service.
        • Restricted Account: All accounts except for the selected accounts can get access to the service.
      • Select Account: Select the desired accounts that can or can not use the remote access feature.
      • Organization: Select the desired organization(s) that can or can not use the remote access feature.
        Note:
        • This setting is available only when the Organization Management feature is enabled.
        • By default, when you select an organization, its associated sub-organizations are selected. Be careful when selecting organizations.
      • Enable IP Restriction: Select the checkbox of the option, and add at least one permitted IP address and subnet mask.

        If you configure this option, only the permitted IP address(es) can use the remote access feature.

    3. Click Confirm.
  5. Click Save.

Result

Network for remote web access is automatically configured, you can log in to the PBX web portal or Linkus Web Client remotely via the FQDN.