Exit SD-WAN Network

In some cases, such as when you don't need the SD-WAN network or want to replace the redundancy member, you can exit the SD-WAN network on Working Server or Redundancy Server.

Exit SD-WAN network for both Working Server and Redundancy Server

  1. Log in to the PBX web portal of the Working Server, go to System > SD-WAN PBX Networking.
  2. At the top-right corner, click Exit and Delete, then click OK in the pop-up window.

    Both Working Server and Redundancy Server exit the SD-WAN network, and the SD-WAN network is deleted. The specified contacts of both servers will receive a SD-WAN Network Exited event notification.

Exit SD-WAN network for Redundancy Server

  1. Log in to the PBX web portal of the Redundancy Server, go to System > SD-WAN PBX Networking.
  2. At the top-right corner, click Exit, then click OK in the pop-up window.

    The Redundancy Server exits from the SD-WAN network; The specified contacts of both servers will receive SD-WAN Network Exited event notification.