Set up a SIP Phone

This topic describes how to register a SIP extension on a SIP phone in the local network.

Prerequisites

  • You have created a SIP extension.
  • The SIP phone is in the same local network as Yeastar P-Series Software Edition.

Procedure

  1. Gather information of extension registration.
    For most SIP phones, the following credentials are needed in order to register with Yeastar P-Series Software Edition.
    • The PBX's IP address
    • SIP registration port (Path: System > Network > Service Ports)
    • Transport protocol (Path: Extension and Trunk > Extension > Advanced > Transport)
    • Extension information (Path: Extension and Trunk > Extension > User):
      • Extension number
      • Registration name
      • Registration password
      • Caller ID name
  2. Register the extension on a phone.

    Log in to the phone's web interface, fill in and save the required items to register the SIP extension.

  3. Confirm the extension's registration status in one of the following ways:
    • On the phone's web interface, check if the extension is registered.
    • Log in to PBX web portal, go to Extension and Trunk > Extension, check if the endpoint icon displays in the Online Status column.

Result

The SIP phone is ready for use. Users can use the SIP phone to make and receive calls.