Version 30.6.0.16

Released Date: January 11, 2018

New Feature

  • Added Multisite Interconnect feature.
  • Added a new SIP trunk type “Account Trunk”.
  • Added templates of SIP trunk.
  • Added support for answering an intercom/paging call.
  • Added support for importing configurations of SIP register trunks.
  • Added support for importing configurations of outbound routes and inbound routes.
  • Added support for configuring IAX jitter buffer on Web page.
  • Added a default rule of outbound restriction: an extension user can make a maximum of 5 calls in 1 minute.
  • Added FTP access permission to the voicemail files and one-touch recording files which are stored in PBX local flash.

Optimization

  • Updated the following system prompt: English prompt, Korean prompt, and Hebrew prompt.
  • Optimized the Web user interface: the PBX's GUI language will be synchronized to your browser language.
  • Optimized call recording: the administrator can choose whether to record internal calls.
  • Optimized blocklist feature: the administrator can restrict specific extension users from calling the blocked numbers.
  • Optimized SLA feature: the administrator can enable or disable the SLA prompt.
  • Optimized backup feature: the administrator can choose to backup system configurations, custom prompts or call logs.
  • Added support for adding network drive for Windows domains.
  • Optimized call forwarding: if an extension is unregistered, incoming calls to the extension will be forwarded to the “No answer” destination.
  • Optimized CDR Auto Cleanup: when the CDR number reaches 90% of the Max Number of CDR, the system will send notification.
  • Optimized Auto Recording Cleanup: the system will send notification when the usage of the device is about to reach the pre-configured maximum value.
  • Optimized LDAP feature: when importing LDAP, the system can automatically add new phonebook nodes.
  • Optimized LDAP feature: you can order the contacts by contact names.
  • Improved the security of shared files on cHar: the administrator can add permitted IP addresses to access the shared files.
  • Optimized billing feature: the administrator can configure whether to disconnect a user’s call if the user’s balance is insufficient.
  • Optimized Distinctive Ringtone setting: you can enter uppercase letters, lowercase letters, numbers, “-”, “_” and “+”.
  • Optimized Notification Contact settings: if you select a notification method without setting the email address or phone numbers, the system will not save the settings.
  • Optimized OpenVPN settings: you cannot upload a certification file with incorrect format.
  • Optimized Call log searching feature.
  • Optimized VLAN Priority setting: the default VLAN priority is 0.
  • Optimized SLA feature: Users: users can dial numbers start with “*” through an SLA trunk.
  • Optimized voicemail prompts.

Fixed Bug

  • Fixed the issue that Mobility Extension user could not change the status of time condition.
  • Fixed call log issue: when an extension and the mobility extension were ringing simultaneously, you answered the call on the extension or on the mobility extension; the system would generate 3 call logs.
  • Fixed the issue that if you switched the network type of a 4G module, the system would count the cellular data incorrectly.
  • Fixed the issue of GSM/3G/4G module: a GSM/3G/4G module could not handle calls and SMS simultaneously.
  • Fixed the issue of GSM/3G/4G module: after rebooting the PBX, the GSM/3G/4G modules could not work.
  • Fixed "Email to SMS" issue: The system could not send long emails to multiple destination numbers.
  • Fixed system email issue: the default TLS port for Sina emails could not work.
  • Fixed DOD issue on mobility extensions: if you use a mobility extension to make calls, the system would not send the DOD number of the extension.
  • Fixed the issue that after receiving a packet of cancelling Register from Panasonic, the Yeastar system would break down.
  • Fixed the prompt of Dial by Name.
  • Fixed voicemail prompt: if you set the inbound route to voicemail, you could not hear the prompt of “Ask Caller to Dial 5”.
  • Fixed All Busy Mode for SIP Forking: the feature only worked for the called extension, not worked for calling extension.
  • Fixed ring group issue: if a member of the ring group canceled “Always Forward” by dialing *071; the member still could not receive calls.
  • Fixed voicemail feature: if “Ask Caller to Dial 5” was enabled, users could not dial 0 to exit voicemail.
  • Fixed BRI trunk issue: when making a call through a BRI trunk, the user could not get a prompt immediately if the called number is busy.
  • Fixed BRI trunk issue: importing DOD numbers could not work.
  • Fixed the compatibility issue with China Mobile IMS trunk: when making a call through the IMS trunk, the calling user could not get a prompt if the called person cancelled the call.
  • Fixed the compatibility issue with Loxone SIP Intercom system.