Version 30.5.0.8

Released Date: July 12, 2017

New Feature

  • Added FTP access for voicemail, One-Touch recording, Auto Recording and CDR when those are stored in external storage like TF card, USB drive or internal hard disk.
  • Added SIP Message by using MESSAGE method communicated between SIP phones.
  • Added Caller ID name modification for SIP trunk DOD settings. Note that Global DOD has been removed, and “Caller ID Number” and “Caller ID Name” have been added on trunk edit page.
  • Added All Busy Mode for SIP Forking. When one SIP terminal registers one extension is called and is already in call, the other SIP terminals registered to the same extension will be marked as busy and can’t be called. Outgoing call will not be restricted.
  • Added support for different extensions to use the same email address. Note that when email address has been used by different extensions, the user Web interface will only be logged in with extension number.
  • Added support for DSS Key type – Call Park of Yealink phones. Call can be parked directly by pressing the Call Park key as well as monitoring and pressing to retrieve parked call.
  • Added support for counting the duration from “Queue receives call” to “Agent answers call”.
  • Added 2 VLAN subinterfaces for LAN and WAN.
  • Added DTMF pass-through for FXS when connected with door phone.
  • Added warning to create backup when trying to upgrade.
  • Added CDR query condition for Caller ID name. There will have a separate column of Caller ID name in the CDR CSV file that you download.
  • Added support for Auto Recording file, One-Touch Recording file, and CDR backup in real time to stand-by device in Hot Standby configuration.
  • Added silence detection for FXO, BRI and E1.
  • Added new Italian and German Web language.
  • Added support for saving Web configuration by pressing Enter.
  • Added Local Loop trunk for IP address 127.0.0.1.
  • Added BLF monitoring support for Time Condition default feature code like *800.

Optimization

  • Optimized SMTP authentication. Account authentication is added.
  • Optimized China PRI default configuration to match most of China PRI lines.
  • Optimized Web text on Adapt Caller ID page. “Dial Patterns” is replaced by “Adaptation Patterns”.
  • Optimized Adapt Caller ID feature. Now it is also available for Ring Group and Queue.
  • Optimized Web text in Event Center. “Storage Space Full” is replaced by “Storage Full”.
  • Added feature conflict prompt that when Char and Hotel App is enabled at the same time, the Mini Bar feature of Hotel will affected. Some feature codes will not work well.
  • Optimized the name of extension type when Char App is enabled. “Hotel Extension” is replaced by “Normal Extension”, and “Room Extension” is replaced by “cHar Extension”.
  • Optimized the SIP qualify feature for Peer-Type SIP trunk. Some providers doesn’t support OPTION to be qualified which makes the trunk status “unknown” and calls can’t be made. Currently when Quality option is unchecked, it would show “unmonitored” on the PBX monitor page and calls are allowed to make.
  • Removed check box of Feature Code header and parking number range.
  • Added Italian SLA dial prompt.
  • Added prompt for Email to SMS: when country code is not working, try the customized country code.
Optimized PAI and Remote Party ID would be disabled by default.

Fixed Bug

  • Fixed Dial by Name issue: the recorded name can be played in the Dial by Name event.
  • Fixed Booking issue for Hotel App: when the room type 1 has been booked and room type 1 has one last room, this room still can be checked in by other person.
  • Fixed the “More” button display issue on Notification menu: “More” button would still be clickable when there is no notification.
  • Fixed the issue that voicemail couldn’t be found when Caller ID name including “&” on the user Me page.
  • Fixed network disk issue that it couldn’t be reconnected when it was disconnected due to unstable network.
  • Fixed the issue that users could still call into Queue when Join Empty and Leave When Empty is both checked. Note that users can still call into the Queue if any extension in the Queue has enabled Mobility Extension and Simultaneous Ring.
  • Fixed the issue that Ring Group members’ status would still show ringing when the call had been answered by Pick Up.
  • Fixed incorrect CPU display when PBX has been up for many days.
  • Fixed the issue that lacking External Host Refresh Internal in SIP NAT settings would cause host parsing failure.
  • Fixed the issue that Only Keep Missed Call Records of Auto CLIP was not available for PSTN line. Note that this would work only when Answer Detection checked as Polarity as well as the line provider should deliver polarity signal.
  • Fixed the call recording file playback problem that call recoding file would often be played by the first extension number of PBX rather than the extension number selected.
  • Fixed no video problem caused by codec payload negotiation that video phone would include different payload. Note that currently the payload is fixed to 99 for PBX.
  • Fixed the issue that content of users.conf would be erased after executing command “astconfig”.
  • Fixed the issue that paging initiator would also be paged when he was in the paging group that he paged.
  • Fixed the issue that DND status of Hotel APP page would not change when DND was enabled by a hotel extension.