Version 30.11.0.7
OPTIMIZATION
- System Stability
-
- Fixed the system issue: Neither internal calls nor external calls could be established when multiple Linkus Push channels were not released.
- Fixed the system issue: The system would crash after receiving an abnormal ACK packet (Non-existed extension number in the From header and no tag in To header).
- Fixed the system issue: The PBX might crash for high CPU usage when the Call Pickup feature was used.
- Speed up the hard disk formatting.
- Fixed the system issue: If both API and DND Status Synchronization setting were enabled, the usage of the system memory would keep increasing.
- Extension
-
- Fixed the Presence issue: DND status could not be changed on web.
- Fixed the issue of Extension Monitor: The extension with 1-digit number could not be monitored.
- Fixed the issue of Call Forwarding: If the Call Forwarding destination was set to a mobile number, the mobile number Prefix could not be deleted.
-
Fixed the issue of Extension List: The Extension List page could not display if the database has an error of the extension User Password.
-
Optimized All Busy Mode for SIP Forking: PBX would send “486 Busy” message to the caller when the callee is busy.
In the earlier version, PBX would sent “603 Decline” to the caller.
- Trunk
-
-
Added support for processing P-Preferred-Identity (PPI) header in the request message.
Added the P-Preferred-Identity (PPI) option to Outbound Parameters and Transfer Parameters( ).
- Optimized the Register Trunk settings: Special characters ; & " ' \ < > ` | are allowed in the Password field.
- Fixed the issue of Peer Trunk: Failed to register a peer-trunk by using Chinese characters in Username field.
-
- SIP Settings
-
- Added support for getting DID and Caller ID from
P-Preferred-Identity (PPI) header.
- Added P-Preferred-Identity option to Get DID From and Get Caller ID From ( ).
- Added P-Preferred-Identity option to Get DID From and Get Caller ID From ( ).
- Added the iLBC Mode: You can go to , select the iLBC mode: 20ms (default) or 30ms.
- Added support for getting DID and Caller ID from
P-Preferred-Identity (PPI) header.
- Callback
-
-
Optimized the Callback feature: If the Peer-Trunk is used for Callback, the From header in INVITE request would use its DOD number in priority.
- If the peer trunk has no DOD number, PBX will use "callback+original caller ID" in From header, which would cause a callback failure.
- If the Register-Trunk is used for Callback, make sure the From User is configured, or callback would fail.
-
- Call Queue
-
- Fixed the issue of Call Queue: The CPU usage was too high when transferring an external call to a queue by dialing *75.
- Fixed the issue of Queue custom configuration: The custom configuration in which defined the incoming calls transferred to the failover destination when the queue members were busy or ringing didn't take effect.
- Fixed the issue of Call Queue: The Queue would work abnormally after you transferred an external call to a queue by dialing *75.
- CDR and Recording
-
- Fixed the issue of Call Recording: If call was parked, the conversation resumed on another phone would not be recorded.
- Fixed the issue of CDR and Recording: The PBX did not generate a CDR and Recording file when an external call was transferred to call queue.
- Firewall
-
- Fixed the Firewall issue: If the default firewall rules were deleted, the rules would be automatically restored after the PBX was rebooted.
- Hot Standby
-
- Fixed the issue of Hot Standby: The File Share function could not work after the Hot Standby was enabled.
- Fixed the issue of Hot Standby: The data was not synchronized between the primary server and the secondary server if the secondary server took over as an active server.
- Me Page
-
- Fixed the issue of Me page: The Voicemail Access PIN could not be edited.
- API
-
- Added support for Cross-Origin Resource Sharing (CORS), which allows JavaScript clients from a different origin to access PBX APIs.
- Fixed the issue of Call Transfer API: The API program would be restarted if Call Transfer API was used.
- Fixed the Extension Status report: PBX didn't send API report when the extension status was changed.
- Fixed the Apply issue: If the third-party server frequently sends API application requests, the PBX might fail to establish internal calls and external calls.
- Fixed the issue of DTMF report: The infos parameters were not sent to the 3rd-party server because that the URL was incorrect.
- Fixed the issue of DTMF report: No infos parameters in the DMTF report when you dialed an external number through IVR and the callee pressed keys following by the IVR prompt.
- Auto Provisioning
-
- Optimized DSSKey/Line Key setting: The Value field is allowed to enter maximum 255 characters.
-
Optimized Account settings for IP phones: The extension Caller ID Name will be automatically filled in the Label field.
Note: In the earlier version, the extension number will be automatically filled in the Label field. - Fixed the issue of Backup and Restore: The backup file didn't contain Auto Provisioning Custom Templates,which led to an error on custom template after restoring data from the backup file.
- Changed the model name of Yealink SIP-W60B from SIP-W60B to W60B(W60P/W53P/W41P/CP930W-Base).
- Fixed the issue of Auto Provision Template: The special characters %cn in the custom template could not be identified correctly and would be deleted.
- Fixed the issue of Auto Provisioning Device List page: The Auto Provisioning Device List could not display if the assigned extension name contained a line break.
-
Fixed the DSSkey issue on Fanvil: The DSSkey setting could not take effect when the Auto.
is set to -
Fixed the issue on Fanvil: Fanvil phones could not download phone book files after auto provisioning,
-
Fixed the issue of Auto Provision Template: The setting in Other tab would be cleared if the characters
`
was contained in the custom template. -
Fixed the issue that the auto provisioning would be failed after restoring configurations from a backup file.
- Fixed the issue on Yeastar TA FXS Gateway: If you disabled an FXS port, the port settings could not be cleared after auto provisioning.
- Fixed the issue on Cisco: The Cisco DTMF could not work after auto provisioning.
- Fixed the issue of Grandstream GXV3240 and GXV3275: The Russia Time Zone was incorrect.
- Fixed the issue of Custom Template: When adding devices in bulk, the selected custom template could not take effect after auto provision.
- Linkus
- The Linkus version will be updated to 2.2.21 automatically after you upgrade the PBX. Check the updates of the new Linkus App in the followings.