Outbound Route Parameters

Descriptions for parameters in exported and imported Outbound Route CSV file.

Parameter Description Importance Restriction Default Value
Name The name of outbound route. Required Space and special characters are not allowed.

Outbound route's name cannot be duplicated.

The maximum character length is 63.

 N/A
Outbound Caller ID The caller ID that is displayed on the callee's device. Optional Numbers, letters, and characters [ ] ().- + * # and placeholder {{.Ext}} are allowed.

The maximum character length is 31.

 patterns
Pattern The pattern used to match a callee number. Only when the callee number is matched will the outbound call go through this route. Required Numbers, letters, and characters [ ] * # ( ) . - + ! are allowed. The maximum character length is 31.
Note: Pattern will be filled with default value X. if you leave these fields empty.
 X.
Strip The number of digits that will be stripped from the front of callee number before the call is placed. Optional Only numbers 1 - 16 are allowed. N/A
Prepend The digits that will be prepended to the callee number before the call is placed. Optional Numbers, letters, and characters ( ) . - + * # are allowed.

The maximum character length is 31.

 N/A
Trunks The trunks that can be used to dial out. The PBX will route outbound calls through this trunk when the dialed number matches the outbound route. Required Permitted value: one or more trunk names existed in PBX.

For multiple trunks, please enter trunk names and use & as a separator, e.g. name1&name2.

Note: If the trunk you enter does not exist in PBX, it will be skipped.
 N/A
Rrmemory Hunt Whether to remember which trunk was used last time, and then use the next available trunk to call out. Required Permitted value:
  • 0: Disable
  • 1: Enable
Note: Rrmemory Hunt will be filled with default value 0 if you leave this field empty.
 0
Extensions The extensions that are allowed to make outbound calls through this route. Optional Permitted value: one or more extension numbers, extension group names, or organization names existed in PBX.
Format:
  • When entering the organization name, you must enter the complete path with parent organization(s) connected by character /, and with the prefix Organization_, i.e. Organization_{Parent Organization}/{Organization Name}. For example, Organization_Yeastar/Marketing Center/Training Team.
  • For multiple extensions, extension groups, or organizations, please enter the numbers or names and use & as a separator, e.g. extension_number1&extension_number2&extension_group_name3&Organization_Parent Organization/Organization Name4.
Note: If the extensions, groups, or organizations you entered are not existing in PBX, it will be skipped.
 extension
Outbound Route Password Whether to require users to enter the same PIN to make outbound calls through this route. Required Permitted value: disable, single_pin, or pin_list.
Note: Outbound Route Password will be filled with default value disable if you leave these fields empty.
 disable
PIN The PIN is required to make outbound calls through this route. Required if Outbound Route Password is single_pin Only numbers are allowed.

The minimum character length is 3 and the maximum is 15.

 N/A
PIN List The PIN codes in the selected PIN list are required to make outbound calls through this route. Required if Outbound Route Password is pin_list Permitted value: The name of a PIN list existed in PBX.
Note: If the PIN list name you entered is not existing in PBX, it will be skipped.
 N/A