Synchronize Phone Time with Yeastar P-Series PBX System via Auto Provisioning

You can synchronize the time of the provisioned phone with Yeastar P-Series PBX System via Auto Provisioning feature.

Prerequisites

The phone is connected to Yeastar P-Series PBX System via Auto Provisioning, and has been assigned an extension.
For more information, see the following topics:

Procedure

Step 1. Set up PBX as NTP Server

  1. Log in to PBX web portal, go to Extension and Trunk > Extension, edit the extension that is assigned to the phone.
  2. Click the Phone tab.
  3. Scroll down to the Preference section, complete the following settings.

    • Primary NTP Server: Set the value as the IP address of your PBX.
    • Time Zone: Select Use PBX Time Zone.
  4. Click Save.

Step 2. Apply the configuration to IP phone

  1. Go to Auto Provisioning > Phones, click beside the desired phone.

    The system prompts you whether to reprovision the phone.

  2. In the pop-up window, click OK.

Result

The phone time is now synchronized with the PBX.