Restrict Specific Countries or Regions from Accessing Yeastar P-Series Software Edition

By default, all the countries and regions are allowed to access Yeastar P-Series Software Edition. Sometimes hackers may remotely access your phone system to make international and long-distance calls, monitor conversations, or do other operations that may cause security threats to your phone system. In this case, you can restrict specific countries or regions from accessing your phone system.

Procedure

  1. Log in to PBX web portal, go to Security > Security Settings > Allowed Country IPs.
  2. Turn on the option Enable Allowed Country/Region IP Access Protection.

    The system tries to identify whether the connection from your current IP address is accepted in the Static Defense allowlist of your PBX.

  3. If current IP address is not accepted in the Static Defense allowlist of your PBX, the system would try to identify the country/region from which your current IP address is originated. You need to allow connections from your current country/region. Otherwise, you can NOT enable and use the IP access protection feature.
    • If the system successfully detects your country/region, a warning icon and a pop-up window will be displayed, prompting you to allow access for your current country/region.

      You should click OK to allow IPs from your current country/region to access the PBX. In doing so, the warning icon is disappeared, and operation status of your country/region is changed to .

    • If the system fails to detect your country/region, a warning icon and a pop-up window will be displayed, prompting you to allow access for your current IP address.

      You should click OK to add your IP address to the Static Defense allowlist. In doing so, the warning icon is disappeared, and connections from your IP address are accepted.
      Tip: You can check the added IP address on Security > Security Rules > Static Defense.

  4. To allow desired countries/regions to access the PBX, do as follows:
    • To allow a country/region to access the PBX, do as follows:

      1. In the search box, enter a desired country or region.
      2. In the Operations column, set the status to .
    • To allow multiple countries/regions to access the PBX, do as follows:

      1. Select the checkboxes of desired countries or regions.
      2. Click Allow.

        The status will be changed to .

  5. Click Apply.

Result

Only the devices with IP addresses originating from the allowed countries or regions can access the PBX.
Tip: For the disallowed countries or regions, if you want to allow a specific IP address to access the PBX, you can add a static defense rule to accept connections from the desired IP address. For more information, see Add a Static Defense Rule.