Set up an SD Card

This topic describes how to set up an SD card on Yeastar P-Series PBX System.

Note: SD card is ONLY supported on P560 and P570.

Prerequisites

  • Prepare an SD card, which meets the following requirements:
    • Maximum capacity: Up to 64 GB
    • Minimum performance: SDHC/SDXC Class10 UHS-I U3
    • Minimum write speed: 60 MB/s
    • Recommended brands: Sandisk Extreme Pro Series, Sandisk Extreme Series, or Kingston
  • Back up data on the SD card in advance.

Procedure

  1. Insert the SD card to the PBX's SD card slot.
  2. Format the SD card.
    1. Log in to PBX web portal, go to System > Storage > Storage Devices, find the SD card.
    2. In the Operations column, click .
    3. In the pop-up dialog box, click OK.

      The SD card is formatting. All the data in the SD card will be cleared after formatting.

  3. In the Storage Devices section, check status of the SD card.
    • Connected: The SD card is connected.
    • Not Inserted: No SD card is inserted.
    • Error: Format error.
    • Read Only: Can NOT write data to the SD card.

What to do next

Decide what data will be stored on the SD card. For more information, see Manage Storage Locations.