Configure Network for Remote API Access by a Yeastar FQDN
With a Yeastar FQDN, you can remotely access Yeastar P-Series APIs via a secure tunnel, without the need of configuring public IP and port forwarding for the PBX. This topic describes how to configure network for remote API access via FQDN.
Prerequisites
- Standard Plan
- Enterprise Plan
- Ultimate Plan
Procedure
- Log in to PBX web portal, go to .
- Turn on Yeastar FQDN.
- In the Fully Qualified Domain Name
(FQDN) field, set up the FQDN domain name.
- Select a domain name from the drop-down list.
- Enter a host name in the first field.Note: Think twice before you enter the hostname. The FQDN cannot be changed after you save the configurations.
For example, select domain name ras.yeastar.com and enter hostname yeastardocs, you will get an FQDN yeastardocs.ras.yeastar.com.
- Enable remote API access feature and configure usage permission.
- In the Features section, go to the Remote Access tab.
- Click beside the API Access.
- In the pop-up window, complete the following settings according to
your need.
- Name: Display the remote access feature name, and cannot be edited.
- Status: Select Enabled.
- Remote Access Service Port: Display the remote API access port 443. The port is assigned by Remote Access Service automatically.
- Enable IP
Restriction: Optional. Select the
checkbox of the option, and add at least one permitted
IP address and subnet mask.
If you configure this option, only the permitted IP address(es) can use the remote access feature.
- Click Confirm.
- Click Save.
Result
You can now remotely access P-Series APIs via the FQDN.