Version 81.8.0.4

Released Date: December 13, 2018

Optimization

System Stability

  • Fixed a few issues to improve the system stability.

System Security

  • Improved Web security.

Extension

  • Added support for configuring overlapped Extension ranges (Settings > PBX > General > Preferences > Extension Preferences).
  • Optimized Extension setup: PBX will allow you to create an extension number that is not in the User Extension range.
  • Fixed Extension Group issue: Creating an extension would fail if the extension number was used as an Extension Group name.
  • Fixed the issue that Max Call Duration setting could not take effect.

SIP Trunk

  • Fixed the issue that if blank spaces were included in a SIP trunk name, no inbound calls could reach the SIP trunk.
  • Added support for entering special character @ in the Authentication Name field.
  • Fixed the WebRTC Trunk issue: The WebRTC trunk could not work if the trunk number was the same with an extension number.

Call Features

  • Optimized Call Pickup: Users can see the incoming caller ID before they pick up the call.
  • Optimized Call Pickup: If an extension's incoming call is picked up by other person, the extension's phone will not display any information of "missed call".
  • Fixed the Call Forwarding issue: The system would hang up if a call was forwarded to a queue.
  • Fixed the BLF monitoring issue on Extension: The BLF LED could not properly indicate the monitored extension's status if the extension had multiple calls at the same time.
  • Fixed the BLF monitoring issue on Extension: The BLF LED status was incorrect when the monitored extension was not registered.
  • Fixed the BLF monitoring issue on Static Agent: The BLF LED status was incorrect if the agent's Caller ID Name was not the extension number.
  • Fixed the issue that if password was set on a queue, the dynamic agents might not receive incoming calls.

Call Control

  • Fixed the issue that the PBX would route inbound calls to incorrect destinations if multiple Account Trunk existed on the PBX.

Import Function

API Interfaces
  • The IP address that exceeds the allowed failed login attempts would be listed on the PBX Block IP Address page.

    You can delete the trusted IP address from the blocklist.

  • Added Transfer Inbound Calls interface.

    Through this interface, inbound calls can be transferred to different destinations, like extension, IVR, queue, etc.

  • Added Transfer Outbound Calls interface.

    Through this interface, outbound calls can be transferred to different destinations, like extension, IVR, queue, etc.

  • Through this interface, PBX will do the following operations for the hotel extension:

    • Empty the extension's voicemail box.
    • Delete the extension's outbound route permissions.
    • Delete the extension's alarms.
    • Reset the extension's Caller ID name setting.
  • Optimized "Prompt Play End" report:

    After an IVR prompt is played, PBX will send an API report to the 3rd-party application server.

  • Optimized API reports: All the API reports include SN parameters.
  • Added the following failure reasons in "Call Failure" report:
    • 404 NOT found
    • 480 Temporarily unavailable
    • 484 Address Incomplete
    • 486 Busy Here
    • 487 Request Terminated
    • 603 Declined
  • Fixed the issue that "Call an External Number via IVR" would not generate CDR.

System Email

  • Added support for configuring Email User Name.

Event Center

  • Added System New Firmware Detection event.

    When the a new PBX firmware is detected, PBX will send the event notification. The event notification is disabled by default.

  • Renamed the Application Upgrade to Application New Version Detection.

    When a new Application is detected, PBX will send then event notification. The event notification is disabled by default.

  • Added Application Upgrade event.

    When a Application is upgraded, PBX will send the event notification. The event notification is disabled by default.

System Log

  • Added support for recording Linkus server logs.

Operation Log

  • The operations of checking extension's password would be recorded in Operation Log.
    Note: These types of logs could not be deleted.