Auto Provision

Release notes for Auto Provision on Yeastar Cloud PBX Instance.

Version 1.11.1

Release Date: January 10, 2023

  • For Snom phones:
    • Added support for entering a vertical line (|) to separate extension number and feature code in function key settings.
    • Fixed the auto provisioning failure issue: After changed the default SIP UDP port, the auto provisioning of Snom phones became failed.
  • Fixed the bulk edit issue: When editing auto provisioned devices in bulk, only the first 19 ones would take effect.
  • Fixed the custom template issue: After rebooting PBX, configuration parameters added in the Other tab of a custom template was changed unexpectedly.

Version 1.10.3

Release Date: October 10, 2022

  • For Yealink phones: Added support for MAC address range of 249ad8000000 ~ 249ad8ffffff.

Version 1.10.2

Release Date: October 20, 2021
  • Fixed the auto provisioning issue: After auto provisioned Yealink IP phone, and entered user name and password on the phone interface, the phone failed to register the extension.

Version 1.10.1

Release Date: May 24, 2021

  • Fixed the issue of phone web page access: After you accessed the PBX via Remote Management portal, and clicked a phone IP address via Auto Provisioning page, you would fail to access the phone if the phone was configured to redirect HTTP protocol to HTTPS protocol.

Version 1.10.0

Release Date: January 11, 2021

  • Update the MAC address restrictions of Yealink phones: When adding a Yealink phone, the entered MAC address should start with 805e0c, 001565, or 805ec0.

Version 1.9.31

Release Date: November 17, 2020

  • Optimized the web interface.

Version 1.9.29

Release Date: November 9, 2020

  • For Yealink T31, T31P, T31G, T33P, and T33G phones: Added support CTI feature.

  • Added support for Fanvil phones: X1S, X1SG, X3SG, X3U, X4SG, and X7A.
  • For Fanvil X1S, X1SG, X3SG, X3U, X4SG, X4U, X5U, X5S, X6, X6U, X7, X7C, X7A, X210, and X210i phones: Added support for Hot Desking feature.

  • Fixed the upgrade issue for the following Snom phones: Failed to upgrade the phone firmware by auto provisioning.
    • D305, D315, D345, D375, and D385
    • D712, D715, D717, D725, D735, D745, D765, and D785
  • Fixed the issue that the Company Contacts could not be synchronized: When a user added company contacts on Linkus client, the user's IP phone that had been auto provisioned could not synchronize the added contacts.
  • Fixed the Function Key issue for Snom D765: The ShortText of Function Key did not take effect.
  • Fixed the issue of auto provision failure for Snom D765: Added a new device of D765 model, the system recognized D765 as 765, which caused auto provisioning failure.
  • Fixed the issue of custom template for Fanvil X4U: The parameters added in Other tab could not take effect.
  • Fixed the issue of custom template for Fanvil phones: If the template name contained space, the parameters added in Other tab would lose.

Version 1.9.21

Release Date: October 9, 2020
  • Fixed the issue that the template of Yealink T3 Series phones could not be viewed.
  • Fixed the issue that auto provisioning for Yealink T3 Series phones would be failed.

Version 1.9.19

Release Date: August 27, 2020

  • For Fanvil X210 and X210i phones: Added Daylight Saving Time and Location options in the Preference tab.
  • Added support for Yealink T3-series phones: T30, T30P, T31, T31P, T31G, T33P, and T33G.
  • Fixed the issue of custom template: Added parameters in the Other tab, some custom parameters would lose.
  • Fixed the issue of custom template for Yealink: Modified the type of Administrator Password on the custom template, and then reconfigured the phone by this custom template, the type of administrator password did not take effect.

Version 1.9.14

Release Date: July 15, 2020

  • Added support for Fanvil phones: X210, X210i, X4U, X5U, X6U, X7A, X7, and X7C.
    Phone firmware requirement: 2.2.1
    Note: If the phone firmware is lower than 2.2.1, the auto provision would fail.
  • For Fanvil phones: Added BLF/Conference and BLF/DTMF options for the Subtype of DSS Key.
  • Optimized the Contacts: If you add PBX Contacts to Yealink phones by auto provisioning, the last name and first name of the contact displayed on the phone are consistent with the PBX Contacts.
  • For Fanvil phones: Local Phone Book is disabled by default.

Version 1.9.8

Release Date: November 17, 2020

  • Added support for setting a Yealink phone as a hot-desking phone. The extension user with hot desking enabled can log in and use the hot-desking phone.
  • Optimized the DSS Key settings for Fanvil phones: The BLF option of DSS Key Subtype is subdivided into BLF/AXFER, BLF/BXFER, BLF/Conference, and BLF/DTMF.
  • Fixed the DSS Key issue for Fanvil X5 phones: After auto provisioning DSS Keys for X5 phones, some DSS keys were not displayed.
  • Fixed the Line Key issue of Yealink phones: When the Type of Line Key was set to Speed Dial, no options were available for Line.
  • Fixed the Auto Provisioning issue on Fanvil phones: The login password of phone web interface was reset after auto provisioning.
  • Fixed the Side Key issue for Fanvil phones: After auto provisioning Side Keys, some side keys did not take effect.

Version 1.8.11

Release Date: May 14, 2020

  • For Fanvil phones: Added support for enabling and disabling uaCSTA function.

Version 1.8.10

Release Date: May 7, 2020

  • Linkus Lite supports Contacts feature.
    • Linkus Windows Desktop: 1.10.3 or later.
    • Linkus macOS Desktop: 1.10.3 or later.
  • Supported to add PBX Contacts to Yealink phones by auto provisioning.

    The supported Yealink phones:

    • SIP-T19P_E2, SIP-T21P_E2, SIP-T23P, SIP-T23G, SIP-T27G, SIP-T29G.
    • SIP-T40P, SIP-T40G, SIP-T41S, SIP-T41P, SIP-T41U, SIP-T42S, SIP-T42G, SIP-T42U, SIP-T43U, SIP-T46S, SIP-T46G, SIP-T46U, SIP-T48S, SIP-T48G, SIP-T48U.
    • SIP-T52S, SIP-T54S, SIP-T53, SIP-T53W, SIP-T54W, SIP-T56A, SIP-T57W, SIP-T58A.
    Note:
    • For Company Contacts: The phone supports up to 1000 contacts.
    • For Personal Contacts: If multiple accounts are registered on the phone, the personal contact of the first account is automatically configured by default.
  • Added support for automatically enabling uaCSTA feature by auto provisioning the following phones:
    • Yealink: SIP-T46S, SIP-T54W, SIP-T40P, SIP-T27G, SIP-T40G, SIP-T54S,SIP-T46G, SIP-T53, SIP-T52S, SIP-T23G, SIP-T53W, SIP-T41U, SIP-T42S,SIP-T57W, SIP-T48S, SIP-T42G, SIP-T42U, SIP-VP59, SIP-T23P, SIP-T43U,SIP-T46U, SIP-T58, SIP-T48G, SIP-T21PE2, SIP-T56A, SIP-T29G, SIP-T41P,SIP-T48U and SIP-T41S.
    • Fanvil: X1, X1P, X2P, X2C, X3S, X3SP, X3G, X4, X4G, X5S and X6.
  • Added support for Yealink SIP-T42U.
  • For Yealink phones: The configurable number of the Remote Phone Book is changed to three.
  • Optimized settings of Fanvil phones ( X4 and X4G): Add the Local Phone Book setting in Features tab.

Version 1.8.7

Released Date: January 14, 2020

  • Added support for the following IP phones:
    • Snom: D120, D305, D375, D712, D715, D725, D745, and D765.
    • Yealink: SIP-T41U, SIP-T43U, SIP-T46U, and SIP-T48U.
  • For Snom phones (D1XX series, D3XX series, and D7XX series): Added Administrator Mode, Administrator Password, HTTP Server Username, and HTTP Server Password settings on the Preference page.
  • Fixed the issue of Default Template: The drop-down list of Series/Model couldn't be expanded on the default template page.

Version 1.8.4

Released Date: September 18, 2019
  • Added support for the following IP phones:

    • Snom: D735 and D717
    • Yealink: VP59, CP960, and CP920

  • Optimized DSS settings on Fanvil phones (X5/X5G, X4/X4G, X5S and X6): Added Action URL type of DSS key.
  • Optimized settings on Snom phones (D315, D345 and D385): Added the Tone Scheme setting on Preference page.
  • Fixed the auto provision template issue of Fanvil phones: the value of <language> parameter in the template was inaccuracy.
  • Fixed the phonebook issue on Yealink W60B: Only 5 handsets could download the phonebook from PBX after auto provisioning.
  • Fixed the issue of custom template: Custom template did not take effect if you add devices in bulk or import auto provisioning file.

Version 1.7.12

Released Date: August 15, 2019

  • Optimized DSSKey/Line Key setting: The Value field is allowed to enter maximum 255 characters.
  • Optimized Account settings for IP phones: The extension Caller ID Name will be automatically filled in the Label field.

    Note: In the earlier version, the extension number will be automatically filled in the Label field.
  • Fixed the issue of Auto Provision Template: The special characters %cn in the custom template could not be identified correctly and would be deleted.
  • Fixed the issue of Auto Provisioning Device List page: The Auto Provisioning Device List could not display if the assigned extension name contained a line break.
  • Fixed the DSSkey issue on Fanvil: The DSSkey setting could not take effect when the DSSkey > Line is set to Auto.

  • Fixed the issue of Auto Provision Template: The setting in Other tab would be cleared if the characters ` was contained in the custom template.

  • Fixed the issue that the auto provisioning would be failed after restoring configurations from a backup file.

Version 1.7.7

Released Date: May 14, 2019

  • Updated Russian and Italian web interface.
  • Optimized Auto Provisioning template: Blank spaces are allowed in the Name filed.
  • Fixed the Auto Provisioning template issue: The customized parameters on the template would be lost.

  • Fixed Auto Provisioning template issue: A template error would occur if the special character & was contained in the customized parameters.

Version 1.7.3

Released Date: March 27, 2019

  • Added support for Yealink phones: SIP-T53, SIP-T53W, SIP-T54W, and SIP-T57W.

Version 1.6.6

Released Date: March 4, 2019

  • Added support for Snom phones: D315, D345, D385, and D785.

Version 1.5.7

Released Date: February 25, 2019

  • Fixed Auto Provisioning might not take effect.

Version 1.5.4

Released Date: January 7, 2018

  • Added support for Fanvil phones: C400, C600, X1, X1P, X2, X2C, X3S, X3G, X4, X5G, X5S, X6, H5.

Version 1.4.14

Released Date: December 13, 2018

  • Improved the Web security.

Version 1.4.13

Released Date: November 9, 2018

  • Added support for Vtech phones: ET635 and ET605.
  • Added support for Yealink phones: T40G, W60P, W53P, W41P, W52P and W56P.
  • Added support for configuring iLBC_13_33kbps and iLBC_15_2kbps on Yealink phones.
  • Added support for configuring "User Password" on Vtech phones.
  • Optimized time settings on Yealink phone and Vtech phone: The default time zone and NTP server on the phones are the same as the PBX settings.
  • Fixed the issue that adding contacts on Auto Provisioning web page would cause excessive CPU consumption.

Version 1.4.6

Released Date: July 31, 2018

  • Added support for the Vtech phones: ET685, VDP650, VCS752, VCS754.

Version 1.3.4

Released Date: June 29, 2018

  • This version of Auto Provisioning is compatible with the cloud PBX version 81.5.0.7.

Version 1.3.2

Released Date: April 10, 2018

  • Supported Yealink phones that have MAC addresses with 805ec0.
  • Fixed the issue that auto provision might not take effect.

Version 1.2.1

Released Date: December 5, 2017

  • This version of Auto Provisioning is compatible with the cloud PBX version 81.2.0.8.