Version 81.9.0.43
Released Date: October 29, 2019
OPTIMIZATION
- Extension
-
- Optimized extension registration: The PBX would not send MWI NOTIFY message to Linkus client after the Linkus client was registered.
- Optimized extension registration: Speed up and shorten the time of registering extensions in bulk.
- Optimized Max Call Duration(s)
setting.
- Max Call Duration(s) setting is applicable to all types of calls on the PBX.
- Max Call Duration(s) setting for Extensions: Added 10800 option ( ).
- Global Max Call Duration(s) setting: Added 10800 option ( ).
Note: The precedence of Max Call Duration(s) (Global v.s. Extension):- For internal calls: The Max Call Duration(s) setting of the caller's extension takes precedence.
- For outbound calls: The Max Call Duration(s) setting of the caller's extension takes precedence.
- For inbound calls: The global Max Call Duration(s) setting takes precedence.
- Trunk
-
- Fixed the issue of Peer Trunk (DID-based): the call might be failed when it was routed only based on IP address without matching the DID Number.
- SIP
-
- Added support for responding 200OK when receiving 407 Proxy Authentication Required.
- Fixed the SIP call issue: The inbound call matched a wrong SIP trunk, and caused the call failed.
- Fixed the issue of SIP INFO compatibility: PBX did not respond when receiving SIP INFO packets (content-type=application/QSIG), and the call was ended after 32 seconds.
- CDR
-
- Optimized the search method of CDR and recordings: Speed up and shorten the time of searching CDR and recordings.
- Linkus Server
- The new version of Linkus Server (2.3.15) is pre-installed after
upgrading the PBX. Check the updates below:
- Improved Linkus performance.
- LDAP Server
- The new version of LDAP Server (1.0.4) is pre-installed after
upgrading the PBX. Check the updates below:
- Improved functional stability.