Provision NEC IP Phone with Yeastar P-Series Cloud Edition
This topic takes NEC DT900 ITK-12D-1P (firmware: 05.03.04.03 ) as an example to describe how to provision NEC IP phone with Yeastar P-Series Cloud Edition.
Important: Due to NEC phone limitations, provisioning an
NEC IP phone is only supported with a Cloud PBX whose
domain name is not longer than
17 characters (excluding the prefix
https://
). If this limit is exceeded, provisioning
will fail.Requirements
The firmwares of NEC IP phone and Yeastar PBX meet the following
requirements.
Model | Phone Requirement | PBX Requirement |
---|---|---|
DT700 ITL-2E-1P | 03.01.64.00 or later | 84.17.0.53 or later |
DT700 ITL-6DE-1P | 03.01.64.00 or later | 84.17.0.53 or later |
DT700 ITL-12D-1P | 03.01.64.00 or later | 84.17.0.53 or later |
DT700 ITL-24D-1P | 03.01.64.00 or later | 84.17.0.53 or later |
DT700 ITL-8LD-1P | 03.01.64.00 or later | 84.17.0.53 or later |
DT700 ITL-8LDE-1P | 03.01.64.00 or later | 84.17.0.53 or later |
DT700 ITL-12DG-3P | 03.01.64.00 or later | 84.17.0.53 or later |
DT700 ITL-12CG-3P | 03.01.64.00 or later | 84.17.0.53 or later |
DT820 ITY-6D-1P | 04.04.28.14 or later | 84.17.0.53 or later |
DT820 ITY-8LDX-1P | 04.04.28.14 or later | 84.17.0.53 or later |
DT820 ITY-8LCGX-1P | 04.04.28.14 or later | 84.17.0.53 or later |
DT820 ITY-6DG-1P | 04.04.28.14 or later | 84.17.0.53 or later |
DT820 ITY-32LDG-1P | 04.04.28.14 or later | 84.17.0.53 or later |
DT820 ITY-32LCG-1P | 04.04.28.14 or later | 84.17.0.53 or later |
DT900 ITK-6D-1P | 05.03.04.99 or later | 84.17.0.53 or later |
DT900 ITK-12D-1P | 05.03.04.03 or later | 84.17.0.53 or later |
DT900 ITK-8LCX-1P | 05.03.04.99 or later | 84.17.0.53 or later |
DT900 ITK-8TCGX-1P | 05.03.04.99 or later | 84.17.0.53 or later |
DT900 ITK-6DG-1P | 05.03.04.99 or later | 84.17.0.53 or later |
DT900 ITK-12DG-1P | 05.03.04.99 or later | 84.17.0.53 or later |
DT900 ITK-32LCG-1P | 05.03.04.99 or later | 84.17.0.53 or later |
DT900 ITK-32TCG-1P | 05.03.04.99 or later | 84.17.0.53 or later |
DT900S ITK-6DGS-1P | 05.03.04.99 or later | 84.17.0.53 or later |
DT900S ITK-32LCGS-1P | 05.03.04.99 or later | 84.17.0.53 or later |
DT900S ITK-32TCGS-1P | 05.03.04.99 or later | 84.17.0.53 or later |
Prerequisites
- Prepare a DHCP server in the subnet where the IP phone is located to provide
an IP address for the IP phone.Note: Make sure that there is only one DHCP server running in the subnet, or the IP phone would fail to obtain an IP address.
- RESET the IP phone if it is previously used.
- Gather information of IP phone, including Vendor, Model, and MAC address.
- Make sure that you have downloaded the template for the desired phone model (Path: ).
Procedure
Step 1. Add the NEC IP phone on PBX
Add the IP phone on PBX. The PBX will generate a configuration file based on the phone's MAC address.
- Log in to PBX web portal, go to .
- Click .
- In the IP Phone section, enter the following phone
information.
- Vendor: Select NEC.
- Model: Select the phone model. In this example, select DT900 ITK-12D-1P.
- MAC Address: Enter the MAC address of the IP phone.
- In the Options section, configure the following
settings.
- Template: Select a desired
template from the drop-down list.Note: You can select the default template corresponding to the phone model, or customize your own template. For more information, see Create a Custom Auto Provisioning Template.
- Provisioning Link: A provisioning link is
automatically generated and displayed in this field. This
provisioning link points to the location where the phone's
configuration file is stored.Note: Note down the provisioning link, as you will use it later.
- Template: Select a desired
template from the drop-down list.
- In the Assign Extension section, assign
an extension to the IP phone.Tip: If your desired extension is not listed in the drop-down list, it indicates that the extension has been associated with an IP phone.
- To release the extension from the associated IP phone, see Release an Extension from a Provisioned IP Phone.
- To register the extension to the phone without releasing it from the previously associated one, you need to configure the concurrent registration setting for the extension, as the PBX only allows an extension to register with one SIP endpoint by default.
- Click Save.
The IP phone is added and displayed in the Auto Provisioning phone list.
Step 2. Configure DHCP option 66 on DHCP server
On the DHCP server, configure DHCP option 66 with the provisioning link obtained from the PBX.
- On the running Tftpd64 software, go to .
- Configure the following DHCP options.
- NTP server (Opt 42): Enter the IP address of an NTP server.
- Additional Option: Enter
66
, then enter the provisioning link obtained from the PBX.
- Click OK to save the settings.
Results
- After rebooting the IP phone, it gets an IP address from the DHCP server, downloads the configurations from the PBX via the provisioning link, and applies the settings automatically.
- The extension is successfully registered on the IP phone. You can check the
registration status on