Manually Register Flyingvoice IP Phone with Yeastar P-Series Cloud Edition

This topic takes Flyingvoice P20P (firmware: V0.8.18.6) as an example to introduce how to manually register an extension on a Flyingvoice IP phone.

Supported devices

The Flyingvoice IP phones that are compatible with SIP (Session Initiation Protocol).

Procedure

Step 1. Gather registration information on Yeastar PBX

Log in to PBX web portal, gather the following information for extension registration.

Information Instruction
Extension information Go to Extension and Trunk > Extension > > User > Extension Information, note down the following information:
  • Extension Number
  • Registration Name
  • Registration Password
Transport protocol Go to Extension and Trunk > Extension > > Advanced > VoIP Settings > Transport, note down the transport protocol of the extension.

In this example, the extension use UDP transport protocol.

Note:
  • If the extension uses TCP transport protocol, make sure that the SIP TCP port is enabled on the PBX, or the registration would fail (Path: PBX Settings > SIP Settings > General > Basic).

  • If the extension uses TLS transport protocol, make sure that the TLS is enabled on the PBX, or the registration would fail (Path: PBX Settings > SIP Settings > TLS).
PBX domain name The domain name of the PBX.

In this example, we use the PBX domain name docs.example.yeastarcloud.com for extension registration.
SIP registration port The SIP registration port is 5060.

Step 2. Register extension on Flyingvoice IP phone

  1. Log in to the web interface of the Flyingvoice IP phone.

    1. In the browser's address bar, enter the IP address of the IP phone.
    2. Enter the username admin and the associated password, then click Login.

      In this example, enter the default password admin.

  2. Go to the SIP Account tab, complete the registration configurations.

    1. Select an available line.
    2. In the Line Enable drop-down list, select Enable.
    3. In the Subscriber Information section, enter the extension information.
      • Display Name: Enter the name associated with the account, which will be displayed on the phone screen.
      • Phone Number: Enter the extension number.
      • Account: Enter the registration name of the extension.
      • Password: Enter the registration password of the extension.
    4. In the Proxy and Registration section, enter the PBX server information.
      • Proxy Server: Enter the domain name of the PBX.
      • Proxy Port: Enter the SIP registration port of the PBX.
  3. At the bottom of the page, click Save & Apply.

Result

The extension is registered successfully. You can check the registration status in the Register status field.