Auto Provisioning Phone Information Parameters

Descriptions for parameters in exported and imported Auto Provisioning Phone Information CSV file.

Parameter Description Importance Restriction Default Value
Vendor Phone vendor. Required Refer to the permitted value for the supported phone vendor. N/A
Model Phone model. Required Refer to the permitted value for the supported phone model of various phone vendors. N/A
MAC Address MAC address of the phone. Required Only numbers 0 - 9, letters A - Z or a - z, hyphens - and colons : are allowed.

The maximum character length is 17, where you can enter a combination of letters or numbers with a total of 12 characters.

Examples are given below:
  • FA-B5-49-1A-2B-3C
  • FA:B5:49:1A:2B:3C
  • FAB5491A2B3C
 N/A
Template The configuration template used to provision the phone. Required The name of default or custom template.
Tip: To obtain the value for this parameter, go to Auto Provisioning > Resource Repository > Default Templates / Custom Templates, then copy the name in the Template Name column.
 N/A
RPS PIN RPS PIN for Yealink phones, which can be entered on the phone to complete the RPS provisioning process if required. Optional

Only numbers and letters are allowed.

The maximum character length is 31.

 N/A
Hot Desking Phone Whether to set the phone as a hot desking phone. Optional Permitted value:
  • 0: Disable.
  • 1: Enable.
Note:
  • Hot Desking Phone will be filled with default value 0 if you leave this field empty.
  • Do NOT set this parameter to 1 for DECT phones, or it will cause error when importing.
 0
Authentication First-time Whether to require users to enter authentication information on the phone before triggering the first-time provisioning. Optional
Note:
  • If Hot Desking Phone is set to 1, this parameter MUST be 0, or it will cause error when importing.
Permitted value:
  • 0: Disable.
  • 1: Enable.
Note: Authentication First-time will be filled with a default value if you leave this field empty.
 If Hot Desking Phone = 0, the default value will be 1. Otherwise, the default value will be 0.
Assign Extension The extension to be assigned to the phone. Required if Hot Desking Phone = 0.
Note: Do NOT set this parameter if Hot Desking Phone = 1, or it will cause error when importing.
Only numbers are allowed.

For IP phones, the maximum character length is 7.

For DECT phones, the maximum character length is 1024, and the format should be Handset Number:Extension Number.
Note: Use & to separate multiple handsets. For example, 1:1002&2:1005&3:1006.
 N/A