3. Register Hikvision DS-KH6320 Indoor Station to Yeastar P-Series Software Edition
This topic describes how to register Hikvision DS-KH6320 indoor station to Yeastar P-Series Software Edition.
Prerequisites
Before you start, make sure:
- The indoor station supports SIP protocol.
- The indoor station has been activated and added in iVMS-4200 Client. For more information, see Activate intercom video devices and Add devices to iVMS-4200 Client.
Procedure
Create an extension for the indoor station
- Log in to the PBX web portal, go to , click .
- Change the user information and extension information, or leave the default
settings.
In this example, add a SIP extension 1667 for Hikvision DS-KH6320 indoor station.
- Click Save and Apply.
Register indoor station to the PBX
- Log in to iVMS-4200 Client, go to .
- Select the DS-KH6320 indoor station and click
to enter the Remote Configuration page.
- Optional: If your PBX is not in the same network as that of Hikvision
DS-KH6320 device, set up DNS server.
- Go to .
- In the DNS Server section, enter the IP address of DNS server.
- Click Save.
- Register the indoor station with the PBX extension 1667.
- Go to .
- Select the checkbox of Enable.
- Enter the credentials of extension 1667.
- Server: Select Domain Name.
- Server Domain Name: Enter the IP address of Yeastar P-Series Software Edition. In this example, enter 192.168.66.39.
- Server Port: Enter the SIP registration port of Yeastar P-Series Software Edition. In this example, enter 5060.
- Register User Name: Enter the registration name of the extension. In this example, enter 1667.
- Password: Enter the registration password of the extension. In this example, enter Yeastar123.
- Number: Enter the extension number. In this example, enter 1667.
- Display User Name: Enter the name to be displayed when sending calls. In this example, enter 1667.
- Click Save.
If the indoor station is registered with Yeastar P-Series Software Edition successfully, the Registration Status will display "Registered".