Start or Stop a P-Series Cloud PBX

This topic describes how to start or stop a P-Series Cloud PBX.

Start a P-Series Cloud PBX

To allow users to access the Cloud PBX, you need to start the PBX first.

Procedure
  1. Log in to Yeastar Central Management, go to Cloud PBX > PBX.
  2. Select a desired PBX with status displayed as , then click .

  3. In the pop-up window, click Confirm to start the PBX.
  4. If the PBX has NOT been activated, the system will prompt you to send PBX activation email(s).
    • If you want to send the activation email(s) to customer(s) now, select the checkbox(es) of desired customer(s), then click Send.
      Note: The available customers are the ones who you have added when creating the PBX. To change customers for the PBX, see Change Recipients of PBX Activation Emails.

    • If you don't want to send the activation email(s) right now, click Cancel.
Result
  • The PBX is starting, and the status is displayed as .

  • After the PBX starts up, the status is displayed as .

    Note: If you have set a template for the PBX when creating, the system will automatically provision the PBX with the selected template on initial start-up, and the followings are achieved:
    • After provisioning, the PBX system is already activated. PBX administrators only need to set up super administrator account in the Installation Wizard, then the PBX is ready to use.
    • You can check the provisioning result of the task named Provision-{PBX_Name}-{Serial_Number} on Task > Execution Logs.

Stop a P-Series Cloud PBX

If users don't need the PBX temporarily, you can stop the PBX.

Procedure
  1. Log in to Yeastar Central Management, go to Cloud PBX > PBX.
  2. Select a desired PBX with status displayed as , then click .

  3. In the pop-up window, click Confirm to stop the PBX.
Result
  • The PBX system is stopped, and the status is displayed as .

  • Users can NOT access the PBX.