Yeastar P-Series Software Edition 83.11.0.22

• Added support for selecting codec for Linkus Mobile Client on PBX web portal.

  For more information, see Configure Audio Codec for Linkus Mobile Client.

• Added support for entering ' in email address.
• Added an option Send to for Voicemail, which allows you to decide whether to send notification emails to user's mailbox or a custom mailbox when a user receives new voicemail.

  For more information, see Set up Extension Voicemail.

• Fixed the extension registration issue: A registered extension lost connection and failed to be re-registered.

• Added Enable RTP Keep-alive option, which can be set on Extension and Trunk > Trunk > Advanced > VoIP Settings.
  If the option is enabled, an RTP Comfort Noise (CN) frame will be sent if the PBX does not send an RTP packet within 1 second, ensuring that the NAT and firewall holes are always open during a call.

  Note: The option is only available for register trunk and peer trunk.
• Optimized the Diversion outbound parameter: If Diversion is set to Default, when a call diversion occurs, the system will carry the original call destination number (DID number) in the diversion header of the SIP INVITE packet.

• Added a date option Last Day of Every Month when the frequency of a backup schedule is set to Monthly.
• Fixed the restoring issue: After restoring the PBX from a backup, administrator set to use a restored system prompt but the prompt didn't work.

• Added a date option Last Day of Every Month when the frequency of a call report schedule is set to Monthly.
• Added an option Validity Period of the Download Link when scheduling call reports.

  The supported validity periods are 24 hours, 48 hours, 72 hours, 96 hours, and 120 hours. After the expiration date, the specified recipients can not download call reports via the link.

• Optimized the Agent Performance report.
  • Replaced Total Calls parameter with Total Rings, which indicates the number of calls that rang each agent and the queue.
  • Replaced Unanswered parameter with Missed, which indicates the number of calls that each agent and the queue missed.

• Added Source filter in Call Logs. For inbound calls from Queues or Ring Groups, users can identify specific queue or ring group from the name and number.

  

• Added Time filter for Recordings. Users can filter recordings by the desired time range.
• Optimized the user experience in one-click login to Linkus Desktop Client.
• Fixed the audio conferencing issue: An IVR was added to an audio conference, when a participant pressed keys in the IVR, the key press did not take effect.

• When an extension user answered an incoming call on Linkus UC Client, the call was failed.

• There was a one-way audio issue for the calls on an extension that was registered using FQDN.

• When an extension user picked up a call, the call did not show the original Caller ID.

• Fixed the access permission issue: When an extension user with a specific role accessed the PBX management portal, the system denied the access and prompted no permissions.
• Fixed the role setting issue: If an extension and the extension group it belongs to were both selected in the Reports and Recordings permission settings for a user role, when the extension was deleted from the PBX, the extension group was unexpectedly removed from the role settings.

Fixed the auto provisioning issue: When provisioning the Yealink W70B using a custom template, the settings did not take effect on the IP phone.

Fixed the BLF key issue on hot desking phone: After an extension user logged in to a hot desking phone, the BLF key set for call parking monitoring worked, but the BLF LED remained off, user could not check the call parking status from the light.

Fixed the IVR issue: An external user called into an IVR through SIP trunk, when the user dialed an extension number via the IVR, the call was disconnected.

Fixed the MoH file issue: Administrator was unable to upload the maximum number of MoH files supported by the PBX.