Select Outbound Caller ID (DOD) to Call

Before making outbound calls from Linkus, you can select which outbound caller ID (DOD) to display. You can use the same DOD number for all outbound calls or select a specific DOD for each call.

Requirements

  • PBX Server: 83.21.0.16 or later
  • Linkus Mobile Client: 5.6.6 or later
  • Extension: Your extension has been assigned the permission to select outbound caller IDs.

Methods of selecting DOD to call

By default, the DOD number configured by system administrator is used when you make outbound calls. You can choose to use the same DOD number for all outbound calls or select a specific DOD for each call.

  • Use the same DOD for all outbound calls: You can set a preferred DOD to be used for all your outbound calls. This can be achieved by selecting a DOD number from the drop-down list beside Dialpad or dialing a feature code, as shown below.
    Method Instruction
    Figure 1. Select from list
    1. On the dialpad, tap the Default DOD.
    2. In the list, select the desired DOD number.
    Figure 2. Dial a feature code
    Note: To use this method, you need to obtain a DOD prefix feature code and the short code of the specific DOD number from your system administrator.
    1. In the Dialpad, enter the feature code together with the short code (or the DOD number).

      The dialing format is {dod_prefix_feature_code}*{short_code}/{specific_dod_number}. For example, *085*124 or *085*5503302.

    2. Tap .
  • Select a specific DOD for each call: You can select a specific DOD number for an individual outbound call before dialing. This can be achieved from the Contacts, Call Logs, Voicemails, or Recordings page, or by dialing a feature code, as shown below.
    Page Instruction
    Figure 3. Contacts
    1. Go to Directory > Contacts, tap the desired contact.
    2. Long press .
    3. Tap Dial through PBX and Select DOD.
    4. Select the desired DOD number to call out.
    Figure 4. Call Logs, Voicemail, or Recordings
    1. Under Call Logs / Voicemail / Recordings tab, tap beside the desired record.
    2. Long press .
    3. Tap Dial through PBX and Select DOD.
    4. Select the desired DOD number to call out.
    Figure 5. Dial a feature code on the Dialpad
    Note: To use this method, you need to obtain a DOD prefix feature code and the short code of the specific DOD number from your system administrator.
    1. Dial the feature code together with the short code (or the DOD number), followed by the destination number.

      The dialing format is {dod_prefix_feature_code}*{short_code}/{specific_dod_number}*{destination_number}. For example, *085*124*861088881234 or *085*5503302*861088881234.

    2. Tap .