Jump to main content

| Document Center S-Series PBX

Supported SIP Trunks
Support
Free Trial

Yeastar S-Series VoIP PBX - Docs

Home
Admin Guide
Admin Guide for Yeastar S-Series VoIP PBX.
System Management
System General Settings
The system general settings can be applied globally to Yeastar S-Series VoIP PBX

Release Notes
Release History of the Yeastar S-Series VoIP PBX.
Installation Guide
Installation Guide for Yeastar S-Series VoIP PBX.
Getting Started Guide
A quick start guide for the administrator who is new to Yeastar S-Series VoIP PBX.
Admin Guide
Admin Guide for Yeastar S-Series VoIP PBX.
- Extensions
- Contacts
- Trunks
- Call Control
- Call Features
- Call Recording
- Voice Prompts
- Network
- System Management
  - System General Settings
    The system general settings can be applied globally to Yeastar S-Series VoIP PBX
    - System Preference
      Configure the preferences settings that will be applied globally to the system.
    - Feature Code
      Feature codes are used to enable and disable certain features available in the Yeastar S-Series VoIP PBX. Extension users can dial feature codes on their phones to use that particular feature.
    - SIP Settings
      The SIP configurations require professional knowledge of SIP protocol, incorrect configuration may cause calling issues on the SIP extensions and SIP trunks.
    - IAX Settings
      The IAX configurations require professional knowledge of IAX protocol, incorrect configuration may cause calling issues on the IAX extensions and IAX trunks.
    - Jitter Buffer Settings
      A jitter buffer is used at the receiving equipment to store incoming RTP packets, re-align them in terms of timing and check they are in the correct order. If some arrive slightly out-of-sequence then, provided it is large enough, the jitter buffer can put them back into the right sequence. However, for this to work the receiving device must delay the audio very slightly while it checks and reassembles the packet stream.
  - Security
  - User Permission
    By default, the extension users can log in the system and check their own settings and CDR. You can set different permission to the users according to their roles and duty.
  - Date and Time
    To ensure that the time of logs and CDR is consistent with your local time , you need to adjust the date and time of the PBX.
  - Email
    The system email can be used to reset password, send voicemail to email, send alert event emails, send SMS to Email, send Email to SMS, and send fax to email. To make these features work, you need to set up the PBX system email.
  - Storage
    Yeastar S-Series VoIP PBX provides local storage and supports external storage and network drive storage. You can choose where to store the voicemails, CDR, recordings, logs and backup files.
  - Event Center
    Yeastar S-Series VoIP PBX can monitor system events and logs, then send notifications to the specified notification contacts.
  - Hot Standby
    The Hot Standby solution provides high system availability and prevents you from the unnecessary business loss caused by unexpected server failure.
  - Remote Management
    Yeastar Remote Management provides an affordable, low maintenance solution for easily deploying Yeastar VoIP PBX and VoIP gateways across multiple locations, reducing complexity and providing deep visibility and control.
  - SNMP
  - API
    Yeastar S-Series VoIP PBX provides API interfaces for you to integrate a third-party software or device.
- Multisite Interconnect
  You can connect multi-site Yeastar S-Series VoIP PBX easily by Multisite Interconnect feature.
- Maintenance
  Maintenance gives you access to upgrade PBX firmware, check logs and troubleshooting.
- PBX Monitor
  The PBX monitors the status of Trunks, Extensions, Concurrent Call, Conference.
- Resource Monitor
  Monitor the CPU usage, memory usage, disk utilization and network flow.
- CDR and Recordings
  You can check CDR and auto recordings on the PBX web interface. CDR (Call Detail Record) is a data record that contains various attributes of the call, such as time, duration, call status, source number, and destination number, etc.
Security Guide
Security suggestions and measures of your PBX.
Compatible SIP Endpoints
Configuration guides of tested IP phones, soft phones, door phones, audio alerter devices, and intercom devices.
Solution & Interoperability
Integrate or interconnect the Yeastar S-Series VoIP PBX with other devices or applications.
Auto Provisioning
Auto Provisioning App helps you set up your IP phones and Yeastar TA VoIP gateways in bulk.
Yeastar Linkus
Linkus Server is designed to work with Linkus client.
Conference Panel
Conference Panel App allows you to establish a multiparty call, monitor and manage the conference call on web pages.
LDAP Server
LDAP Server App provides a centralized phonebook management.
QueueMetrics Integration
QueueMetrics Integration App provides the interface to connect Yeastar S-Series VoIP PBX and QueueMetrics.
Hotel
Hotel App provides hotel management with the Yeastar S-Series VoIP PBX.
Billing
Billing App provides a powerful and flexible billing solution.
char utile h+ Integration
char utile h+ Integration App provides a solution to integrate Yeastar S-Series VoIP PBX and char utile.
VPN Server
With VPN connection, you can set up multiple VPN clients to access Yeastar S-Series VoIP PBXsecurely.
Zoho Integration Guide
Zoho Integration App is designed to facilitate quick integration between your Yeastar S-Series VoIP PBX and multiple Zoho applications.
References
General references and glossary of Yeastar S-Series VoIP PBX.

System General Settings

The system general settings can be applied globally to Yeastar S-Series VoIP PBX