Integrate Yeastar S-Series VoIP PBX with Hikvision Intercom Video Devices

By integrating Yeastar S-Series VoIP PBX with Hikvision Video Intercom Indoor & Door Station, you can establish video & audio call between the Indoor Station and the Door Station.

Prerequisites

Make sure the Hikvision devices meet the following requirements:
  • Hikvision DS-KD8003 Door Station: v2.0.0 or later.
  • Hikvision DS-KH6320 Indoor Station: v2.1.0 or later.

Local Network (Tested Environment)

In this guide, the Hikvision devices and Yeastar PBX are in the same local network.
Figure 1. Local Network Topology

The following table shows the information of the tested environment.

Device Firmware Version IP Address
Yeastar S100 30.10.0.67 192.168.9.217
Hikvision DS-KH6320 Indoor Station V2.1.0 192.168.9.211
Hikvision DS-KD8003 Door Station V2.0.0 192.168.9.209

Public Network

If your PBX is not in the same network with Hikvision devices, you need to do port forwarding on the router.
  • SIP registration port: Default UDP 5060
  • RTP ports: Default UDP 10000-12000
Note: Hikvision devices and the iVMS 4200 client must in the same local network.