Test Report for Hikvision DS-KD8003 Video Intercom Door Station

This article is the Interoperability Test Report for Yeastar S-Series VoIP PBX and Hikvision DS-KD8003 Video Intercom Door Station.

Tested equipment & software


Equipment	Firmware/Software Version
Hikvision DS-KD8003 Video Intercom Door Station	2.0.0
Yeastar S100	30.10.0.67

The following table shows a summary of the validated capabilities.

Word definitions in the following test plan table.

DUT: Device Under Test, which in this case is the DS-KD8003 Video Intercom Door Station.
Phone A: A SIP compatible endpoint used to call the DUT.
Phone B: A SIP compatible endpoint used to call the DUT and Phone A.
Phone C: A SIP compatible endpoint registered on Yealink T58A video phone for video call.

SIP Registration

The following test cases verify features related to the registration process with Yeastar S100.


Test Case	Expected Result	Test Result
Attempt registering DUT Extension using incorrect password.	Registration failure status is correctly displayed in web interface.	PASS
Attempt registering DUT Extension using incorrect username.	Registration failure status is correctly displayed in web interface.	PASS
Correctly register DUT Extension.	DUT registers properly and status is correctly displayed in web interface.	PASS
Register DUT multiple extensions.	DUT registers properly and status is correctly displayed in web interface.	PASS
Register DUT Extension using UDP protocol.	DUT registers properly and status is correctly displayed in web interface.	PASS

Inbound Call

The following test cases verify the inbound calling capability of the DUT.


Test Case	Expected Result	Test Result
Audio call
Call DUT from Phone A.	DUT will be able to answer the call and phone A can get the audio from DUT site.	FAIL
Video call
Call DUT from Phone C.	DUT will auto answer the call, video call will be established with DUT. Phone C can monitor DUT status and DUT can not see the status on Phone C.	PASS

Outbound call

The following test cases verify the inbound calling capability of the DUT.


Test Case	Expected Result	Test Result
Audio Call
Press the call button on the DUT to call Phone A.	When the call is answered by Phone A, a two-way audio call is established.	PASS
Call the DUT from Phone A and Phone A doesn't answer the call.	Phone A continues ringing until timeout.	PASS
When an outbound call is established on the DUT and Phone A, call the DUT from Phone B.	Phone B receives busy tone for leaving message.	PASS
Video Call
Press the call button on the DUT to call Phone C.	When Phone C answered the call, Phone C can monitor the outdoor status in real-time, but DUT fails to monitor the status on Phone C side.	PASS

Serviceability

The following test cases verify the serviceability of the DUT.


Test Case	Expected Result	Test Result
Disconnect, then reconnect the Ethernet cable from the DUT.	DUT registers with the PBX server after the network is restored.	PASS