Register Htek Phone with Yeastar S-Series VoIP PBX

This article is based on Htek UC903 and Yeastar S-Series VoIP PBX v30.8.0.14.

About this task

This article is applicable to the Htek UC series 802, 803, 804, 840, 842, 806, 862, 902, 903, 923, 924, 926.
Note: For the IP phone with different firmware version, the web GUI may be different.

Procedure

  1. Log in the web page of the phone.
    • Username: admin
    • Password: admin
  2. Click Account tab, choose one account to configure.
    • Account: Select one account to configure.
    • Account Active: Yes
    • Primary SIP Server: Fill in the domain or IP address of your PBX.
    • SIP Transport: Choose the same transport of the PBX. The default SIP transport on the PBX is UDP.
    • Label: Set the name you want to appear on the phone screen.
    • SIP User ID: Fill in the extension number.
    • Authentication ID: Fill in the extension's Registration Name.
    • Authentication Password: Fill in the extension's Registration Password.
    • Name: The local phone name showing on the other phone when calling out.
  3. Click Save Set.
    If the extension is registered, the page will show "Registered".