Register Yealink Phone with Yeastar S-Series VoIP PBX

This guide is applicable to all the Yealink phones and Yeastar S-Series VoIP PBX v30.8.0.14.

Note: For the IP phone with different firmware version, the web GUI may be different.
  1. Log in the web page of the phone.
    • Username: admin
    • Password: admin
  2. Click Account tab, and choose one account to configure.
    • Account: Choose one account.
    • Line Active: Enabled
    • Label: Set the name you want to appear on the phone screen.
    • Display Name: Set the name you want to appear on the other phone's screen when calling out.
    • Register Name: Fill in the extension's Register Name.
    • User Name: Fill in the extension number.
    • Password: Fill in the extension's Registration Password.
    • Server Host: Fill in the domain or IP address of your PBX.
    • Port: Fill in the same SIP port of the PBX.
    • Transport: Choose the same transport protocol of your PBX.
  3. Click Confirm.
    If the extension is registered, you can see the Register Status shows "Registered".