Add a Static Route
If you set the network mode of Yeastar S-Series VoIP PBX to Dual, you need to add a static route to override the default route entries, routing the traffic from specific IP address to the specified destination.
- Go to Add. , click
-
In the pop-up dialog box, configure the route entry according to the following
information.
- Destination: Enter the destination IP address or IP subnet for the PBX to reach using the static route.
- Subnet Mask: Enter the subnet mask for the destination address.
- Gateway: Enter the gateway address. The PBX will reach the destination address through this gateway.
- Metric: Optional.
Routing metric is used to determine whether one route should be chosen over another.
-
Interface: Select the network interface.
The PBX will reach the destination address using the static route through the selected network interface.
- Click Save and Apply.