Version 80.3.0.3

Released Date: August 29, 2018

New Feature

  • Added a new SIP trunk type “Account Trunk”.
  • Added support for answering an intercom/paging call.
  • Added support for importing configurations of SIP register trunks.
  • Added support for importing configurations of outbound routes and inbound routes.
  • Added support for configuring IAX jitter buffer on Web page.
  • Added a default rule of outbound restriction: an extension user can make a maximum of 5 calls in 1 minute.
  • Added FTP access permission to the voicemail files and one-touch recording files which are stored in PBX local flash.
  • Added support for Remote Management.
  • Supported 30 Extension Groups.
  • Added support for 1-Way Multicast Paging.
  • Added support for monitoring status of dynamic agents.
  • Added email template for Voicemail to Email and Fax to Email.

Optimization

  • Improved the performance and stability of the PBX.
  • Improved the security of web login.
  • Improved the security of SSH login.
  • Optimized queue feature
    • Optimized Queue function: by default, the PBX would not ring the agent who is busy in a call.
    • Optimized the Periodic Announcements of a Queue.
  • Optimized LDAP feature
    • when importing LDAP, the system can automatically add new phonebook nodes.
    • you can order the contacts by contact names.
  • API Interfaces

    • Added support for sending API reports to an absolute path of the third-party software.
    • Added support for querying, downloading, and deleting voicemail files.
    • Optimized the Hotel Wake-up Service.
    • Optimized the DTMF output.
    • Fixed the issue that monitoring analog phones would fail.
    • Fixed the issue that the PBX didn't stop sending API reports when the API token expired.
    • Fixed the issue that API reports would be omitted.
    • Fixed the issue on the calls between extensions: The called extension would ring even though the caller didn't pick up the phone to trigger the call.
    • Fixed the issue that the extension status on the PBX Monitor page didn't refresh automatically.
    • Dynamic agents can log in or log out the queue.
    • Fixed the some API reports didn’t conform to json format.

      To solve this problem, add "version":"1.0.2" in the Login request.

    • Fixed the issue that the PBX would go down if a user called an outbound number that contained letters.
    • Supported for adding an authenticated IP address to get auto recording files from the PBX.
    • Added API interface to query queue status and agent status.
    • Added API interface to pause or resume an agent's service.
    • The CDR reports will show DID number and the agent's ring time.
    • Added support for configuring an extension's outbound route.
    • Added support for querying an extension's outbound route.
  • SIP Trunk

    • Supports up to 64 DID numbers.
    • Added Outbound Parameters to configure SIP parameters for outbound calls.
      • P Asserted Identify: Choose which "P Asserted Identify" value should be contained in the SIP INVITE headers.
      • Diversion: Choose which "Diversion" value should be contained in the SIP INVITE headers.
      • Remote Party ID: Choose which "Remote Party ID" value should be contained in the SIP INVITE headers.
    • Added Transfer Parameters to configure SIP parameters for transferred calls.
      • From: Choose which "From" value should be contained in the SIP INVITE headers.
      • Diversion: Choose which "Diversion" value should be contained in the SIP INVITE headers.
      • Remote Party ID: Choose which "Remote Party ID" value should be contained in the SIP INVITE headers.
      • P Asserted Identify: Choose which "P Asserted Identify" value should be contained in the SIP INVITE headers.
    • Administrator can set the value of Diversion.
    • Added P Asserted Identify setting.
    • Added Remote Party ID setting.
    • Added Inband Progress setting.
    • Added DID setting.
    • Administrator can set whether to add “user=phone” in the SIP INVITE packet.
  • Added SIP advanced settings: Early Media, Maxptime.
  • Recording Function
    • The administrator can choose whether to record internal calls.
    • Extension users can dial feature code to pause or resume recordings during a call.
    • Added support for monitoring the recording status of an extension on a BLF key.
  • Event Center

    • Added support for the following events:
      • VoIP Peer Trunk Re-registered
      • VoIP Register Trunk Re-registered
      • API Authentication Lockout
      • Linkus Client has been Locked
      • Network Drive Lost Connection
    • Optimized the Notification Template.
    • Optimized the fault detection on Network Disk.
    • Added “Extension User Password Changed” event setting.
  • Extension

    • Improved the security of the extension “User Password”.
    • Increased the range of Extension Users to 0~59999.
    • Deleted the Name setting, added Caller ID name setting. Generally, set Caller ID name to the user's name.
    • Fixed the issue that All Busy Mode for SIP Forking setting didn't take effect if the extension had a DOD number.
    • Fixed the compatibility issue with Vtech IP phone: TLS extension could not be registered.
    • Optimized Bulk Editing function of extensions: bulk editing User Agent Registration Authorizations will not affect NAT and Register Remotely settings.
    • Optimized call forwarding: if an extension is unregistered, incoming calls to the extension will be forwarded to the “No answer” destination.
  • Jitter Buffer

    • The path of Jitter Buffer settings are changed to Settings > PBX > General > Jitter Buffer.
    • Added support for choosing which extensions and trunks to apply jitter buffer settings.
    • Added support for configuring the Adaptive Adjustment Size of jitter buffer.
  • Storage

    • Optimized Network Drive settings: If the configurations are incorrect, the system will prompt the cause of the error.
    • Optimized FTP sharing:
      • When you enable FTP sharing, the system will prompt you to enable FTP service.
      • When you disable FTP sharing, the system will prompt you that the FTP sharing is enabled.
    • Fixed the Network Drive issue: If a mounted network drive was disconnected then automatically mounted again, the PBX could not recognize the network drive.
    • Optimized Network Disk setting: the Name filed would not accept blank space.
    • Added support for adding network drive for Windows domains.
  • Firewall
    • Optimized Drop All setting:
      • After enabling Drop All, the system will prompt you to add a firewall rule to accept DNS address.
      • After enabling Drop All, the system will automatically add two firewall rules to allow the PBX to get new version of PBX firmware and Applications.
    • Optimized Firewall: support importing and exporting firewall rules.
  • Operation Log
    • The operation of "Data Processing Agreement" will be recorded in operation logs.
    • Optimized Logs Auto Cleanup: the PBX can store the logs for a maximum of 15 days.
    • Optimized Call log searching feature.
  • Prompt
    • Optimized the Chinese prompt of Voicemail menu.
    • Updated the following system prompt: English prompt, Korean prompt, and Hebrew prompt.
    • Optimized Voicemail prompts.
    • Optimized Recording prompts.
  • CDR
    • Added support for displaying billing Account in the CDR logs.
    • Optimized CDR Auto Cleanup: when the CDR number reaches 90% of the Max Number of CDR, the system will send notification.
    • Optimized CDR: supported displaying DID numbers in CDR.
  • Static Route: Optimized the web interface of Static Route settings.
  • Optimized SLA feature: The administrator can enable or disable the SLA prompt.
  • Optimized the system logs.
  • Optimized the Web user interface: the PBX's GUI language will be synchronized to your browser language.
  • Optimized blocklist feature: the administrator can restrict specific extension users from calling the blocked numbers.
  • Optimized backup feature: the administrator can choose to backup system configurations, custom prompts or call logs.
  • Optimized Auto Recording Cleanup: the system will send notification when the usage of the device is about to reach the pre-configured maximum value.
  • Optimized billing feature: the administrator can configure whether to disconnect a user’s call if the user’s balance is insufficient.
  • Optimized Distinctive Ringtone setting: you can enter uppercase letters, lowercase letters, numbers, “-”, “_” and “+”.
  • Optimized Notification Contact settings: if you select a notification method without setting the email address or phone numbers, the system will not save the settings.
  • Optimized OpenVPN settings: you cannot upload a certification file with incorrect format.
  • Optimized Time Condition: extension users can dial feature code to switch the inbound route destination to “Other Time” destination.
  • Optimized IP Auto Defense: display the block type of a blocked IP.
  • Optimized AMI interface: added the path of recordings in CDR records.
  • Optimized the function of Seizing Trunk by BLF key: the administrator can set who can seize a trunk to call out.
  • Optimized Ring Group and Queue: if an extension is registered on multiple phones, when the extension is busy, the PBX would not call other phones that registered the same extension.

Fixed Bug

  • Fixed the issue that Mobility Extension user could not change the status of time condition.
  • Fixed call log issue: when an extension and the mobility extension were ringing simultaneously, you answered the call on the extension or on the mobility extension; the system would generate 3 call logs.
  • Fixed system email issue: the default TLS port for Sina emails could not work.
  • Fixed DOD issue on mobility extensions: if you use a mobility extension to make calls, the system would not send the DOD number of the extension.
  • Fixed the issue that after receiving a packet of cancelling Register from Panasonic, the Yeastar system would break down.
  • Fixed the prompt of Dial by Name.
  • Fixed voicemail prompt: if you set the inbound route to voicemail, you could not hear the prompt of “Ask Caller to Dial 5”.
  • Fixed All Busy Mode for SIP Forking: the feature only worked for the called extension, not worked for calling extension.
  • Fixed ring group issue: if a member of the ring group canceled “Always Forward” by dialing *071; the member still could not receive calls.
  • Fixed voicemail feature: if “Ask Caller to Dial 5” was enabled, users could not dial 0 to exit voicemail.
  • Fixed the compatibility issue with China Mobile IMS trunk: when making a call through the IMS trunk, the calling user could not get a prompt if the called person cancelled the call.
  • Fixed the compatibility issue with Loxone SIP Intercom system.
  • Fixed the issue that video call could not work.
  • Fixed the compatibility issue with Yeastar TA FXS Gateway.
  • Fixed the SIP message issue: SIP message could not work on Fanvil phones.
  • Fixed the interconnection issue with another device: the interconnection would fail if you used S-Series IPPBX’s extension to register a SIP trunk on other device.
  • Fixed the issue that the SIP trunk could not work if the transport protocol was changed.
  • Fixed the DID matching issue on Inbound Route: if multiple inbound routes have the same DID number(s), the PBX could route inbound calls properly.
  • Fixed the Recording issue: the voice of the caller and callee might be overlapping.
  • Fixed the issue that the extension users failed to download CDR files on Web.
  • Fixed the issue that the PBX displayed incorrect capacity status of network disk.
  • Fixed Auto Cleanup issue: if you chose to store logs to an external device, the PBX would not auto clean up the logs.
  • Fixed issues on Billing App:
    • The billing was improper for transferred calls.
    • If Billing function was enabled, the PBX could not forward calls to external numbers.
  • Fixed the issue on LDAP App:
    • The phone would display incorrect contact information when you queried a contact on your phone.
    • Optimized the Contacts Importing function.
  • Fixed conference issue: inviting external members by your phone would fail if a password was set on the outbound route.
  • Fixed the issue on Conference Panel: if the length of the conference number exceeded 4 characters, the conference panel would have a series of problems.
  • Fixed the voicemail prompt issue: the PBX didn’t play the customized prompt.
  • Fixed CDR issue: when an external call reached a queue, the CDR of this call was incorrect.
  • Fixed the identification issue of feature code.
  • Fixed the video quality issue with Yealink video phones.
  • Fixed the SIP trunk issue:
    • The PBX might terminate a call that was made through a SIP trunk.
    • If T.38 was enabled on the SIP trunk, Call Parking and Call Hold would not work for inbound calls through this SIP trunk.
  • Fixed the issue that SIP trunk could not be registered automatically if the trunk was disconnected.