Version 80.12.0.6

Released Date: December 12, 2019
Note: This release note describes the changes from firmware version 80.5.0.29 to 80.12.0.6.

NEW FEATURES

Auto Backup

Added support for auto backup.

Go to Maintenance > Backup and Restore. click Backup Schedule to configure auto backup.

Call Parking - Timeout Destination

Added support for configuring the timeout destination of Call Parking.

Go to Settings > General > Feature Code > Call Parking to configure the Timeout Destination.

When a parked call hasn't been retrieved before the parking timeout, PBX will route the call to the designated destination.

  • Original Parker: the call will be routed to the Parker who parks this call.
  • Extension: the call will be routed to the designated extension number.
  • Extension's Voicemail: the call will be routed to the designated extension's voicemail.
  • Custom Number: the call will be routed to the designated number.
Recording Notifications

Added support for configuring different recording notifications of internal calls, inbound calls,outbound calls, and callback calls.

Go to Settings > PBX > Auto Recording to configure the recording notifications.
  • Outbound Calls being Recorded Prompt: If the external call (outbound) has enabled call recording, this prompt will notify the external party that the call is being recorded.
  • Inbound Calls being Recorded Prompt: If the external call (inbound) has enabled call recording, this prompt will notify the external party that the call is being recorded.
  • Callback Calls being Recorded Prompt: If the external call (callback) has enabled call recording, this prompt will notify the external party that the call is being recorded.
Custom Reset options

Added support for configuring Reset options.

Go to Maintenance > Reset to configure the resetting options.
  • Reset IP: after the reset, the PBX's IP address will be changed to 192.168.5.150.
  • Reset CDR and Recording Files: reset and delete CDR, one-touch recordings, and auto recording files for trunk, extension and conference calls.
    Note: the CDR and recording files storied in external storage device(s) won't be reset and deleted. Users can delete them manually.
  • Reset Backup Files: reset and delete the backup files.
  • Reset Prompts: reset and delete the uploaded files for custom prompt.
  • Reset Other System Settings: reset other system settings and logs, including system logs, event logs, operation logs, etc.

OPTIMIZATION

System Stability
  • Optimized the mechanism of applying configuration changes to improve the system stability.
    • You don't need to click Apply button to reload Asterisk if you save unchanged configurations.
    • If no Apply button appears after you save some specific configuration changes, then the configurations can be saved without reloading Asterisk.
Trunk
  • Optimized SIP Peer Trunk: Added Enable SRTP setting on the SIP Peer Trunk.
  • Fixed the issue of SIP trunk: If you created a SIP trunk by template, the DID Settings could not display on the SIP trunk created later.
SIP Settings
  • Optimized Session Timer settings: If Session Timer is enabled, the Session-Expires (s) field and Min-SE (s) field are required.
Network
  • Fixed the Static Route issue: The static routes were missing after rebooting the PBX.
Call Transfer
  • Fixed the compatibility issue between Call Transfer and Multisite Interconnect: If Multisite Interconnect was enabled, extension user could not use feature code to transfer the call that was established with an external user.
CDR
  • Fixed the CDR issue: If an inbound call from PSTN trunk to a Ring Group was unanswered, multiple records of missed calls were generated in CDR.
Prompt
  • Optimized the Custom Prompts list: The Custom Prompts list page supports for displaying maximum 127 custom prompt files.
  • Fixed the Notification issue: The notification "English System Prompt Upgrade success" displayed on the PBX web page periodically even no system prompts was upgrade.
Auto Recording
  • To clearly distinguish Auto Recording and One-touch Recording, renamed Recording and Call Recording to Auto Recording.
    Affected web UI:
    • Old Path: Settings > PBX > Recording.

      New Path: Settings > PBX > Auto Recording.

    • Old Path: Settings > System > Storage > Preference > Storage Locations > Recording.

      New Path: Settings > System > Storage > Preference > Storage Locations > Auto Recording.

    • Old Path: Settings > System > Auto Cleanup > Recordings Auto Cleanup.

      New Path: Settings > System > Auto Cleanup > Auto Recordings Auto Cleanup.

    • Old Path: Settings > General > Recording > Call Recording Switch.

      New Path: Settings > General > Recording > Auto Recording Switch.

Email
  • Fixed the Email issue: The POP3 test would fail if you enter a customized user name in the Email Address or Username field.
User Permission
  • Optimized the User Permission setting: Manually entering a value in the Set Privilege As field is not allowed.
Storage
  • Fixed the Network Drive issue: The network drive could not be mounted to the PBX if the network drive server started slower than the PBX.
Event Center
  • Optimized Event notifications: The notification emails contains the PBX Serial Number and the local IP address of the PBX.
Auto Provisioning
  • Added support for the following IP phones:

    • Fanvil: X210, X210i, X1, X1S, X1SG, X2C, X3SG, X3U, X4U, X5U, X6U, X7, X7A and X7C
    • Snom: D385, D735 and D717
    • Yealink: SIP-T41U, SIP-T43U, SIP-T46U, SIP-T48U, SIP-T53, SIP-T53W, SIP-T54W, SIP-T57W,VP59, and W60B
    • Htek: UC902S, UC921, UC921G, UC503, and UC503G
    • Polycom: VVX411
  • For Fanvil X4 phones: Added BLF/DTMF and BLF/Conference subtype options for Memory DSS key.
  • For Snom phones (D1XX series, D3XX series, and D7XX series): Added the Administrator Mode, Administrator Password, HTTP Server Username, and HTTP Server Password settings in the Preference tab.
  • Optimized DSS settings of Fanvil phones (X5/X5G,X4/X4G,X5S and X6): Added Action URL type of DSS key.
  • Optimized Custom Template of Snom phones:You can add custom parameters in the custom template.
  • Fixed the issue of Snom phones: The phones did not reboot automatically after performing auto provision.
  • Optimized settings of Snom phones (D305, D315, D345 and D375): Added the Tone Scheme setting in Preference tab.
  • Optimized the IP address of Snom phones: Whatever the Web Server Type you set for the phone, you can click the IP address that is displayed on the Device List page to access the IP phone.
  • Optimized the issue of Snom phones: Even through you didn't upload the phone firmware to the PBX, an error of firmware upgrade failed would be displayed on the IP phone.
  • Fixed the auto provision template issue of Fanvil phones: The value of <language> parameter in the template was incorrect.
  • Fixed the issue of Custom Template: Custom template did not take effect if you added devices in bulk or imported an auto provisioning file.
  • Fixed the issue on Firmware Upgrade page: The uploaded firmware wasn't be displayed on Firmware Upgrade page after upgrading the phone version.
  • Optimized DSSKey/Line Key setting: The Value field is allowed to enter maximum 255 characters.
  • Optimized Account settings for IP phones: The extension Caller ID Name will be automatically filled in the Label field.Note: In the earlier version, the extension number will be automatically filled in the Label field.
  • Fixed the issue of Backup and Restore: The backup file didn't contain Auto Provisioning Custom Templates,which led to an error on custom template after restoring data from the backup file.
  • Changed the model name of Yealink SIP-W60B from SIP-W60B to W60B(W60P/W53P/W41P/CP930W-Base).
  • Fixed the phonebook issue on Yealink W60B: Only 5 handsets could download the phonebook from PBX after auto provisioning.
  • Fixed the DSSkey issue on Fanvil: The DSSkey setting could not take effect when the DSSkey > Line is set to Auto.
  • Fixed the issue on Fanvil: Fanvil phones could not download phone book files after auto provisioning,
  • Fixed the issue of Auto Provision Template: The setting in Other tab would be cleared if the characters ` was contained in the custom template.
  • Fixed the issue that the auto provisioning would be failed after restoring configurations from a backup file.
  • Fixed the issue on Yeastar TA FXS Gateway: If you disabled an FXS port, the port settings could not be cleared after auto provisioning.
  • Fixed the issue on Cisco: The Cisco DTMF could not work after auto provisioning.
  • Fixed the issue of Grandstream GXV3240 and GXV3275: The Russia Time Zone was incorrect.
  • Fixed the issue of Custom Template: When adding devices in bulk, the selected custom template could not take effect after auto provision.
Billing
  • Fixed the billing issue: No billing record for the inbound call that was transferred to an extension.
  • Fixed the CDR issue: The call logs didn't display the billing information.
Hotel
  • Added support for adding up to 400 rooms in bulk.
  • Fixed the CDR issue: No billing information in the CDR for the outbound calls that were made after checking in.