Monitor Specific Pause Status of an Agent by Function Key
This topic provides an example on how to monitor specific pause status of an agent by function key on Linkus Web Client, Linkus Desktop Client, or on an IP phone.
Prerequisites
- Obtain the following feature codes:
- Pause feature code (Path: )
- Pause Reason feature code (Path: )
- To monitor specific agent pause status on an IP phone, make sure that the IP
phone is connected to Yeastar P-Series Software Edition via auto provisioning, and
has been assigned with an extension.Note: For detailed instructions about auto provisioning the IP phone, see IP Phone Configuration Guide.
Procedure
Assume that you want to monitor the three default pause status of agents 1001, 1002 and 1003 in queue 6400, do as follows to configure function keys for your extension.
- Set up function keys for monitoring specific pause status.
- Log in to PBX web portal, go to , edit your extension.
- Click the Function Keys tab.
- Configure the following function keys.
- Type: Select BLF key.
- Value: Enter the feature codes.
The format should be
Pause feature code
+extension number
+*
+queue number
+pause reason feature code
. For example,*071001*6400*01
. - Label: Optional. Enter a display label for the function key.
- Click Save.
- If you want to monitor specific agent pause status on IP phone, apply the
function key configuration to the IP phone.
- Go to , click beside the desired phone.
- In the pop-up window, click OK.
Result
You can monitor specific pause status of the agents via the followings:
- Function key on Linkus Web Client, Linkus Chrome extension, and Linkus Desktop Client
-
- : The monitored agent is NOT in the specified pause status.
- : The monitored agent is in the specified pause status.
- : The function key configuration failed.
- BLF LED on IP phone
-
- BLF LED Solid Green: The monitored agent is NOT in the specified pause status.
- BLF LED Flashing Red: The agent is in the specified pause status.
- BLF LED off: The BLF key configuration failed.