3. Register Hikvision DS-KH6320 Indoor Station to Yeastar P-Series PBX System

This topic describes how to register Hikvision DS-KH6320 indoor station to Yeastar P-Series PBX System.

Prerequisites

Before you start, make sure:

  • The indoor station supports SIP protocol.

Procedure

Create an extension for the indoor station

  1. Log in to the PBX management portal, go to Extension and Trunk > Extension, click Add > Add.
  2. In the Extension Type drop-down list, select SIP Extension.
  3. Change the user information and extension information, or leave the default settings.

    In this example, add a SIP extension 1667 for Hikvision DS-KH6320 indoor station.

  4. Click Save and Apply.

Register indoor station to the PBX

  1. Log in to iVMS-4200 Client, go to Device Management > Device.
  2. Select the DS-KH6320 indoor station and click to enter the Remote Configuration page.

  3. Optional: If your PBX is not in the same network as that of Hikvision DS-KH6320 device, set up DNS server.
    1. Go to Network > Advanced Settings.
    2. In the DNS Server section, enter the IP address of DNS server.
    3. Click Save.

  4. Register the indoor station with the PBX extension 1667.
    1. Go to Network > SIP Server Configuration.
    2. Select the checkbox of Enable.
    3. Enter the credentials of extension 1667.

      • Server: Select Domain Name.
      • Server Domain Name: Enter the IP address of Yeastar P-Series PBX System. In this example, enter 192.168.66.39.
      • Server Port: Enter the SIP registration port of Yeastar P-Series PBX System. In this example, enter 5060.
      • Register User Name: Enter the registration name of the extension. In this example, enter 1667.
      • Password: Enter the registration password of the extension. In this example, enter Yeastar123.
      • Number: Enter the extension number. In this example, enter 1667.
      • Display User Name: Enter the name to be displayed when sending calls. In this example, enter 1667.
    4. Click Save.

      If the indoor station is registered with Yeastar P-Series PBX System successfully, the Registration Status will display "Registered".