Dashboard Overview

Yeastar P-Series PBX System Dashboard gives you a historical and real-time view of what is happening on the PBX. This topic describes all the widgets on the Dashboard.

Yeastar P-Series PBX System Dashboard provides widgets to help you monitor system performance in real time, and allows you to quickly access specific PBX features by simple click on headings.

The supported widgets are as follows:
  • System performance
  • System information
  • Plan
  • Add-On
  • Interface Status
  • System status
  • Event trend
System performanceSystem informationPlanAdd-OnInterface statusSystem statusEvent trend
System performanceSystem informationPlanAdd-OnInterface statusSystem statusEvent trend
System performanceSystem informationPlanSystem statusSystem statusEvent trend

System performance

System performance displays the following information:
  • Active Calls: The real-time and the supported concurrent calls.
  • CPU Utilization: The PBX's CPU usage.
  • Memory Usage: The PBX's memory usage.
  • Local Storage Usage: The PBX's local storage usage.

System information

Click Information at the top-right corner. System information displays the PBX's network information and basic information.

Plan

Plan displays the plan that you subscribe to or try and its expiration date.

Add-On

Add-On displays the additional service that you subscribe to or try and its expiration date.

Interface status

Interface status displays connection status of interfaces on Yeastar P-Series PBX System.

Table 1.
Interface Description
LAN
  • : Connected.
  • : Disconnected.
WAN
  • : Connected.
  • : Disconnected.
Hard Disk
  • : Connected.
  • : Not inserted.
  • : Connected, but the hard disk is "Read Only" or encounters format error.
  • : Connected, but the hard disk is formatting.
    Note: Hard Disk is ONLY supported on P560 and P570.
USB
  • : Connected.
  • : Not inserted.
  • : Connected, but the USB flash drive is "Read Only" or encounters format error.
  • : Connected, but the USB flash drive is formatting.
    Note: USB is ONLY supported on P550, P560, and P570.
SD Card
  • : Connected.
  • : Not inserted.
  • : Connected, but the SD card is "Read Only" or encounters format error.
  • : Connected, but the SD card is formatting.
Note: SD card is ONLY supported on P560 and P570.
Micro SD Card
  • : Connected.
  • : Not inserted.
  • : Connected, but the Micro SD card is "Read Only" or encounters format error.
  • : Connected, but the Micro SD card is formatting.
Note: Micro SD card is ONLY supported on P520, but it will display as SD Card on the web interface.
Expanded D30 Module
  • : Connected.
  • : Not connected.
  • : Connected, but the D30 module is abnormal.
    Note: D30 module is ONLY supported on P560 and P570.
FXS port
  • : An extension number is assigned to the FXS port.
  • : No extension number is assigned to the FXS port.
FXO port
  • : A PSTN line is connected to the FXO port.
  • : No PSTN line is connected to the FXO port.
  • : Abnormal.
  • : Busy.
BRI port
  • : Available.
  • : Unavailable.
  • : Abnormal.
E1/T1/PRI port
  • : Available.
  • : Unavailable.
  • : Abnormal.
    Note: E1/T1/PRI port is ONLY supported on P560 and P570.
GSM/3G/4G LTE module
  • : Abnormal.
  • : No SIM card is inserted.
  • : The module is powered off.
  • : No signal.
  • : PIN/PUK error.
  • : Network registration failure.
  • : Different signal strength when the trunk is busy.
  • : Different signal strength when the trunk is idle.

System status

System status displays the following information:

  • Registered Extensions: The number of registered extensions and created extensions.
  • SIP Trunks Available: The number of available trunks and created trunks.
  • Linkus Client Logins: The number of Linkus clients where users has logged.
  • Scheduled Backup: Whether scheduled backup feature is enabled or not. If enabled, the system displays the last time when a backup file was created.
  • Blocked IPs: Display the following information:
    • The number of IP address and account that were blocked by the PBX.
    • The last time when an IP address or an account was blocked by the PBX.
  • Emergency Numbers: The number of created emergency numbers.
  • Recording: How much storage space for recording has been used.
    Note: If it displays "Undefined Storage Location", it means that you haven't specified a storage location for recording files.

Event trend

Event trend provides historical and real-time view of system events. You can track frequency of events that were triggered during the last 7 days, 15 days, or 30 days.