Control a Fanvil IP Phone by Linkus Web Client

By enabling CTI mode on Linkus Web Client, a Fanvil IP phone with your extension registered can be connected to your Linkus Web Client, In this way, Linkus Web Client acts as a visual control panel where you can do operations to manage phone calls from Linkus Web Client, while calls are made and received using the Fanvil IP phone.

Applications

This topic is applied to the Fanvil IP phones that are compatible with Linkus Web Client CTI.

Tip: For incompatible IP phones, refer to Control an Incompatible IP phone by Linkus Web Client for instructions on phone control.

Requirements

PBX server
The uaCSTA feature is enabled (PBX Settings > SIP Settings > Advanced > Other Options > Enable uaCSTA Connection).
IP phone
The extension registered on the IP phone is the same as that of Linkus Web Client.
Note: Register only one account on the IP phone, or CTI feature may not work.

Step 1. Set the IP phone to be controllable

Note: If system administrator has assigned your extension to the IP phone via Auto Provisioning, your IP phone is ready for being controlled. In this case, you can directly enable CTI mode on Linkus Web Client.

If system administrator register your extension to the IP phone manually, do as follows to set the IP phone to be controllable.

The following instructions take Fanvil X5S as an example to show how to enable uaCSTA feature and configure a uaCSTA number.

  1. Log in to the phone web interface, go to Line > SIP.
  2. In the Line drop-down list, select your extension.
  3. Expand the Advanced Settings menu, enter your extension number in the uaCSTA Number field.
  4. Expand the SIP Global Settings menu, select the checkbox of Enable uaCSTA.
  5. Click Apply.

Step 2. Enable CTI mode on Linkus Web Client

Change Linkus Web Client to CTI mode, so that you can use Linkus Web Client to manage phone calls on your IP phone.

  1. Log in to Linkus Web Client.
  2. At the top-right corner, click , then select the connected Fanvil IP phone from the drop-down list.

    s

Result

You can do the following operations on the connected Fanvil IP phone from Linkus Web Client:

  • Make/End a call
  • Make a second call
  • Answer/Reject a call
  • Record a call
  • Transfer a call (attended transfer and blind transfer)
  • Hold/Resume a call
  • Swap hold
  • Flip a call