Write Yeastar K2 Image in a USB

If you choose to install Yeastar K2 IPPBX system on a physical machine, you need to write K2 image in the USB in advance. The instructions below introduces how to write K2 image in a USB via UltraISO.

  1. Format your USB with FAT32.
  2. Open the K2 image file via UltraISO.

  3. Click Bootable > Write Disk Image.

  4. Choose your USB drive as Disk Drive, and choose the K2 image file, then click Write.

  5. Click Yes to start writing image.

  6. After the process of writing image is completed, you can check your USB drive.

    The USB should contain the files as the following figure shows.

What's Next:

Install Yeastar K2 System on VMware Workstation