Set up Communication from Yeastar P-Series Cloud Edition to P570

After interconnecting the two P-Series PBX systems, you need to set up routes on the PBXs to allow the extensions of Yeastar P-Series Cloud Edition to make calls to the extensions of P570. This topic describes the basic route settings for the PBXs.

Background information

To make calls from Yeastar P-Series Cloud Edition to P570, do as follows:

Table 1.
Device Instruction
Yeastar P-Series Cloud Edition Set up an outbound route on Yeastar P-Series Cloud Edition to route calls out
P570 Set up an inbound route on P570 to receive calls

We provide a diagram to help you understand the call routing in a better manner.

Set up an outbound route on Yeastar P-Series Cloud Edition

  1. Log in to the web portal of Yeastar P-Series Cloud Edition, go to Call Control > Outbound Route.
  2. Click Add to add an outbound route.
  3. Configure the outbound route.
    1. In the General section, specify a name to help you identify the outbound route.
    2. In the Dial Pattern section, configure dial rules for the outbound route as needed.

      In this example, retain the default settings.

    3. In the Trunk section, select the trunk that is created for P570 from Available box to Selected box.

    4. In the Extension/Extension Group section, select all the extensions from Available box to Selected box.

      In this way, all extension users are allowed to make calls to P570.

  4. Click Save and Apply.

Set up an inbound route on P570

  1. Log in to the web portal of P570, go to Call Control > Inbound Route.
  2. Click Add to add an inbound route.
  3. Configure the inbound route.
    1. In the General section, specify a name to help you identify the inbound route.
    2. In the DID Pattern section, set up the DID matching rule.

      • DID Matching Mode: Select Match DID Range to Extension Range.
      • DID Range: Enter the DID range. In this example, enter the extension range of P570, namely 2000-2050.

      When the dialed number is matched with the DID number, the call will be routed to the corresponding extension.

    3. In Caller ID Pattern section, set up the caller ID match patterns as needed.

      In this example, retain the default settings.

    4. In the Trunk section, select the trunk that is created for Yeastar P-Series Cloud Edition from Available box to Selected box.

    5. In the Default Destination section, select the desired destination.

      1. In the Default Destination drop-down list, select Match Extension Range.
      2. In the extension range field, enter the extension range of P570. In this example, enter 2000-2050.
  4. Click Save and Apply.

What to do next

Make a call to test.

For example, extension user 1000 in the headquarters dials 2000, the extension 2000 in the branch office will ring.