Connect Yeastar P-Series PBX System and Yeastar TA1610 Gateway

This topic describes how to connect Yeastar P-Series PBX System and Yeastar TA1610 gateway, so as to extend 16 FXO trunks on the PBX.

Procedure

Step 1. Create a SIP peer trunk on Yeastar PBX system

  1. Log in to PBX web portal, go to Extension and Trunk > Trunk, click Add.
  2. Configure the trunk settings.

    • Name: Enter a name to help you identify it. For example, Connect-to-TA1610-Gateway.
    • Trunk Status: Select Enabled.
    • Select ITSP Template: Select General.
    • Trunk Type: Select Peer Trunk.
    • Transport: Select UDP.
    • Hostname/IP: Enter the IP address of Yeastar TA1610 gateway. In this example, enter 192.168.6.24.
    • Port: Enter the SIP port of Yeastar TA1610 gateway. In this example, enter the default port 5060.
    • Domain: Enter the IP address of Yeastar TA1610 gateway. In this example, enter 192.168.6.24.
  3. Click Save and Apply.

Step 2. Create a SIP peer trunk on Yeastar TA1610 gateway

  1. Log in to gateway web interface, go to Gateway > VoIP Settings > VoIP Trunk, click Add New Trunk.
  2. In the pop-up window, configure the following settings:

    • Trunk Type: Select Service Provider.
    • Type: Select SIP.
    • Provider Name: Enter a name to help you identify it.
    • Hostname/IP: Enter the IP address of Yeastar PBX system and the SIP port. In this example, enter 192.168.6.124 and the default SIP port 5060.
  3. Click Save and Apply Changes.

Result

  • On the PBX web portal, go to Extension and Trunk > Trunk to check the trunk status. If the connection is successful, the trunk status displays .

  • On the gateway web interface, go to Status > System Status > Port/Trunk Status to check the trunk status. If the connection is successful, the trunk status displays "OK".

It is concluded that Yeastar PBX system is connected to Yeastar TA1610 gateway; 16 FXO trunks are extended on Yeastar PBX system.

What to do next