Set up a Micro SD Card

This topic describes how to set up a Micro SD card on Yeastar P-Series PBX System.

Note: Micro SD card is ONLY supported on P520.

Prerequisites

  • Prepare a Micro SD card, which meets the following requirements:
    • Maximum capacity: Up to 64 GB
    • Minimum performance: SDHC/SDXC Class10 UHS-I U3
    • Minimum write speed: 60 MB/s
    • Recommended brands: Sandisk Extreme Pro Series, Sandisk Extreme Series, or Kingston
  • Back up data on the Micro SD card in advance.

Procedure

  1. Insert the Micro SD card to the PBX's Micro SD card slot.
  2. Format the Micro SD card.
    Note: All the data in the Micro SD card will be cleared after formatting.
    1. Log in to PBX web portal, go to System > Storage > Storage Devices, find the Micro SD card.
      Note: In the Type field, the Micro SD card you inserted will display as SD Card.
    2. In the Operations column, click .
    3. In the pop-up dialog box, click OK.

      The Micro SD card is formatting.

  3. In the Storage Devices section, check status of the Micro SD card.
    • Connected: The Micro SD card is connected.
    • Not Inserted: No Micro SD card is inserted.
    • Error: Format error.
    • Read Only: Can NOT write data to the Micro SD card.

What to do next

Decide what data will be stored on the Micro SD card. For more information, see Manage Storage Locations.