Create an FXS Extension
This topic describes how to create an FXS extension and configure relevant settings.
Prerequisites
You have installed an S2 module or SO module on the PBX.
Procedure
- Log in to PBX web portal, go to Add and select Add. , click
- In the Basic section, configure basic settings of the
extension as follows:
- In the Extension Type drop-down list, select FXS Extension.
- In the FXS Port drop-down list, select an FXS port.
- In the User Information section, configure user
information as follows:
- First Name: Enter the user's first name.
- Last Name: Enter the user's last name.
- Email Address: Enter the
user's email address.
The
user can reset login password of PBX web portal
and Linkus clients login password, receive voicemail messages, or
PBX notifications via the email address.Note: An email address is exclusive to a user.
- Mobile Number: Enter the user's mobile number. The user can receive calls or PBX notifications on this mobile number.
- User Password: Enter a user
password. The user can use the password to log in to Linkus
clients.Note: The password is randomly generated by default. To change user password, a minimum of 10 characters with number, upper case, and lower case are required.
- User Role: Assign a role to the user to determine
whether the user can manage specific PBX features.The default value is None, which means that the user can not manage specific PBX features.Note: The system has default user roles with pre-configured permissions. You can also Create a User Role.
- Organization: Select one or more organizations to
which the extension belongs.Note: This option is available only when you enable the Organization Management feature.
- Job Title: Enter a job title for the user, which will be displayed on Linkus clients.
- In the Extension Information section, configure
extension information as follows:
- Extension Number: Enter an extension number.
- Caller ID: Enter a caller ID number. The caller ID will be displayed on the callee's device.
- Optional: Click other tabs to configure other settings according to your needs.
- Click Save and Apply.
Result
The FXS extension is created.