Yeastar P560 Overview
Front panel
Yeastar P560 supports 1 expansion board. You can install either EX08 board or EX30 board according to your needs.
No. | Interface or Expansion Board | Description | ||
---|---|---|---|---|
① | NFC tag | Tap NFC-capable mobile phone's back against Yeastar logo to quickly configure network settings. | ||
② | EX08 Expansion Board |
Up to 4 modules and 8 RJ11 ports are supported on the expansion board. The 8 RJ11 ports can be used to connect to different objects:
|
||
③ | EX30 Expansion Board | Used to connect an E1/T1/J1 line. |
Rear panel
No. | Indicator, Button, or Interface | Description |
---|---|---|
① | Reset button | Press the button and hold for 10 seconds to restore to factory defaults. |
② | System Indicator | Indicate the system status.
|
③ | Power Indicator | Indicate the power status. |
④ | SD Slot | Insert an SD card to store recording files, voicemails, or logs. |
⑤ | USB Slot | Insert a USB flash drive to storage recording files, voicemails, or logs. |
⑥ | WAN Port |
For connection to Wide Area Network (WAN). |
⑦ | LAN Port | For connection to Local Area Network (LAN). |
⑧ | Console | Connect RS232 line to debug the system. |
⑨ | Power Switch | Press this button to switch on/off the device. |
⑩ | Power Inlet | Connect the supplied power supply to the port. |
⑪ | Protective Earth | Connect to the ground to reduce the risk of electrocution to the user or protect the PBX from bad effects of external noise in case of a lightning strike. |
⑫ | Antenna Socket | Rotate the antenna into the Antenna Socket. |