Set up Port Forwarding on Mikrotik Router

This topic provides a configuration example of port forwarding on Mikrotik router.

  1. Check the SIP UDP port and RTP port on Yeastar K2 IPPBX.
    1. Log in the PBX web interface, go to Settings > PBX > General > SIP > General.
    2. Note down the default port or change the default port.

  2. Forward SIP UDP 5060 on Mikrotik Router.
    As the following figure shows, we forward port 5060 to 5566.
    Note: To enhance the PBX security, we highly suggest you not to forward the SIP port 5060 to 5060.
  3. Forward RTP ports 10000-12000 on Mikrotik Router.
    As the following figure shows, we forward ports 10000-12000 to 10000-12000.