System Requirements for YCM Server

To deploy YCM Server, you need to know the requirements of hardware, Ethernet port, and operating system.

Important: The private subnet of the server MUST be set to one of the following subnet options, otherwise the server installation would fail.
  • 10.0.0.0/8
  • 172.16.0.0/12 (excluding the 172.17.x.x and 172.19.x.x IP address ranges)
  • 192.168.0.0/16
Tip: We provide a server calculator to help you calculate the required server configurations for the entire deployment of Yeastar P-Series Cloud PBX. For more information, see Server Calculator.

Hardware requirement

The server hosting YCM should meet the following minimum requirements.
Item Requirement
CPU
  • Performance: Intel brand, 4 vCPU (thread), 3 GHz
  • Instruction Sets: Must support the following instruction sets:
    • SSE3
    • SSSE3
    • SSE4.1
    • SSE4.2
    • POPCNT
    • CMPXCHG16B (CX16)
Note: When running the lscpu command, the L3 cache needs to be visible.
Memory 8 GB
Storage 200 GB
Important: Minimum 150MB/s read speed and 150MB/s write speed.

Operating system requirement

Item Requirement
Version Ubuntu 24.04 LTS - 64 bit
Note:
  • Ubuntu 20.04 LTS is also supported, but we recommend that you start with Ubuntu 24.04 LTS, as 20.04 LTS is reaching the end of its standard five-year support window.
  • For proper functioning of the server, a standard Ubuntu installation is required. Minimal installation is NOT recommended.
Language English
Important: The default operating system language MUST be set to English to ensure the proper operation of the server.

Ethernet port requirement

The YCM Server needs 1 Ethernet port.

Port requirements

To ensure the proper operation of all services on the YCM server, open the following ports on the firewall:
Note: Make sure that all the servers can communicate with each other in the private network.
Protocol Port
TCP 80
TCP 443
TCP, UDP 9080
Note: This rule is only required if the Homer service is installed on the YCM server,