Configure AI Voicemail Transcription with Built-in Service

Yeastar P-Series PBX System supports AI voicemail transcription powered by built-in AI engine,allowing users to quickly review voicemail messages. This topic describes how to configure AI voicemail transcription with the built-in AI engine.

Requirements

Item Requirement
Firmware 37.23.0.83 or later
Subscription
  • Subscribe to Enterprise Plan or Ultimate Plan to ensure the AI Transcription feature is available.
    Note: You can get started with the AI transcription feature using the one-time free transcription minutes that come with your subscription plan (120 minutes for Enterprise Plan or 240 minutes for Ultimate Plan).
  • To expand AI transcription minutes, subscribe to the Transcription add-on service (Path: Plan > Add-on Subscription).

Procedure

  1. Log in to PBX web portal, go to AI > AI Toolbox.
  2. Turn on the switch of Voicemail Transcription.

  3. In the Service Type drop-down list, select Build-in Service.
  4. Configure voicemail transcription settings.

    1. Set the transcription language.
      • Language: In the drop-down list, select the desired language to be detected and transcribed for voicemail messages.
      • Languages to Auto-Detect: If you set the Language to Auto Detection, select the desired languages for auto detection.

        The system will automatically detect and transcribe voicemail messages in the selected languages.

        Note:
        • You can select up to 5 languages for auto-detection simultaneously.
        • Only one region can be selected per language. For example, you cannot select both English (UK) and English (US) at the same time.
    2. In the Extension Scope for This Feature section, specify which extensions / extension groups / departments are allowed to use voicemail transcription feature.
      • All Extensions: All extensions can use this feature.
      • Specific Extensions: Only selected extensions can use this feature.
  5. Click Save.

Result

  • The AI voicemail transcription feature powered by built-in AI engine is enabled. The system will automatically transcribe both group and extension voicemail messages into readable texts in the specified language via the built-in service.
    Note: You can customize transcription language for single extension (Path: Extension and Trunk > Extension > AI > Voicemail Transcription > Language), which will be applied to the group voicemails in Broadcast to Members mode and personal voicemails delivered to the extension. For more information, see Configure AI Voicemail Transcription for an Extension.
  • The system automatically monitors transcription usage and sends notifications when specific capacity thresholds are reached:
    • When transcription utilization rate (used minutes / total minutes) has reached the pre-configured capacity thresholds, the PBX sends a notification Your AI Transcription Usage is Reaching the Capacity Limit to notify relevant contacts.
      Note:
      • The default thresholds are 80%, 90%, and 95%.
      • You can customize the thresholds as needed (Path: System > Event Notification > Your AI Transcription Usage is Reaching the Capacity Limit > Event Detail > Event Setting > Capacity Alert Threshold).

    • The total AI transcription minutes is fully used, the PBX sends a notification AI Transcription Limit Reached to notify relevant contacts.
    Note: In addition, you can track AI transcription usage using one of the following methods.
    • View used transcription minutes from the Transcription Usage Details report. For more information, see Access Transcription Usage Details Report.
    • View used transcription minutes and total capacity directly from the Dashboard (Only visible to super administrator account).