Installation Precautions & Warning

Installation Precautions

  • The equipment room should be dry, ventilated, no corrosive gases, and no strong electromagnetic interference.
  • Reserve space for the device to facilitate heat dissipation.
  • The humidity of the equipment room should be kept less than 80%, and the humidity should be constant at around 25 °C. If necessary, the corresponding facilities should be installed.
  • Avoid installation in direct sunlight, too cold, too hot or humid (temperature range: 0 ° C ~ 40 ° C, humidity range: 60% or less).
  • Avoid installation in places where there is frequent vibration, dust, or contact with water and oil.
  • It is better to install an anti-static floor.
  • Keep a distance from other devices and do not stack them with other devices.


  • Do not disassemble or modify the device.
  • Never use a 3rd party power adapter.
  • Do not remove the power supply during the device startup or upgrade, otherwise, the device may not be able to start up.
  • Please remove the power supply when writing. Power on the device after wiring is completed.