Auto Provision

Release notes for Auto Provision on Yeastar S-Series VoIP PBX V4.

Version 65.2.2

Release Date: April 7, 2024

  • Added support for Yealink IP phones: T21_E2, T31W, T34W, T44U, T44W, T58W, W70B, CP925, CP965, CP935W.
  • Fixed the auto provisioning failure issue: If PBX was in DHCP mode, IP phones failed to be auto provisioned when the PBX was rebooted after a power failure.

Version 65.1.2

Release Date: January 10, 2023

  • Fixed the bulk edit issue: When editing auto provisioned devices in bulk, only the first 19 ones would take effect.
  • Fixed the web page issue: There was no response when clicking Add and Edit buttons on the Auto Provisioning page.

  • Fixed the custom template issue: After rebooting PBX, configuration parameters added in the Other tab of a custom template was changed unexpectedly.

  • Fixed the auto provisioning failure issue: If the default registration name of an extension was changed, it would be failed to register the extension by auto provisioning as the system still used the extension number for registration validation.
  • Fixed the auto provisioning failure issues for Yealink phones:
    • After added a Yealink T48U IP phone by importing an auto provisioning file, the device model displayed in the device configuration page was incorrect.
    • After added a Yealink T31G IP phone by importing an auto provisioning file, the assigned extension was not displayed in the device configuration page.
  • Fixed the Auto Provisioning issues for Fanvil phones:
    • After changed the display language of Fanvil X3S/X3SP IP phones via auto provisioning, the setting didn't take effect as the value of <language> parameter in the template was incorrect.
    • After added a custom template for Fanvil X4U IP phone, the pickup number in the Function key settings were missing or became uneditable randomly.
    • A Fanvil X4U-V2 IP phone was provisioned via PnP method, after rebooting the IP phone, the device model displayed in the device list became incorrect.
  • Fixed the default template issue for Htek phones: The line key parameter values in the default auto provisioning template of Htek UC921G IP phone were incorrect.
  • Fixed the auto provisioning failure issue for Snom phones: After changed the default SIP UDP port, the auto provisioning of Snom phones became failed.