Import Parameters - Outbound Routes

Descriptions for the Outbound Route parameters that you can import to Yeastar S-Series VoIP PBX.

Parameter Description Importance Restriction Default Value
Name Required The following characters are NOT allowed:

Spaces and : ! $ ( ) / # ; , [ ] \ " = < > & ' ` ^ % @ { } |

N/A
Patterns Optional Only the following characters are allowed:

Numbers and X x Z z N n W w . ! [ ]

X.
Strip Optional Only numbers are allowed.

The maximum length is 7.

N/A
Prepend Optional Only numbers are allowed.

The maximum length is 20.

N/A
Member Trunks Trunks that can be used to dial out. Required Trunk Name of your trunk.

For multiple trunks, enter trunk names and use & as a separator, e.g. Trunkname1&Trunkname2.

Note: If the trunk you enter is not existing in PBX, the trunk will be skipped.
N/A
Member Extensions Extensions which can dial out through this outbound route. At least 1 extension number or 1 extension group must be entered. Extension numbers.

For multiple extensions, enter extension numbers and use & as a separator, e.g. 1001&1002&1003.

Note: If the extension you enter is not existing in PBX, the extension will be skipped.
N/A
Extension Group Extension Groups who can dial out through this outbound route. Extension group name.

For multiple groups, enter group names and use & as a separator, e.g. group1&group2&group3.

Note: If the extension group you enter is not existing in PBX, the extension will be skipped.
N/A