Yeastar P-Series Cloud PBX Deployment Guide

For Yeastar Partners who would like to host Yeastar P-Series Cloud PBX in their own way, we provide this deployment guide, with which the Yeastar Partners can learn about the structure and every detail on the deployment of Yeastar P-Series Cloud PBX.

Audience

This guide is for network engineer, system administrator, or anyone who supports infrastructure in the cloud. We assume that readers are familiar with networking and other IT related knowledge.

Objectives

This guide provides the following information to help you deploy Yeastar P-Series Cloud PBX.

Scenarios with support

While this guide provides all the necessary information to help you prepare the deployment environment, certain critical steps (such as the image installation, etc.) must be completed with assistance from Yeastar Support. In addition, for complex configuration changes and system-level operations, professional assistance from Yeastar Support is also required, as listed below.

Scenario Description
Initial system installation After the deployment environment is ready, submit environment details and certificates for official system image installation by Yeastar support.

Yeastar support will check the configurations and contact you to arrange the image installations on your servers.
Full infrastructure migration Migrate the complete P-Series Cloud PBX system (all system components) to a new infrastructure.
Domain name update Modify assigned domain names for SBC server or SBC Proxy server.
Public IP address change Updating public IP addresses for YCM, SBC, or SBC Proxy server.
New PBXHub HA Deployment Establish a new High Availability architecture for PBXHub servers.
Upgrade to PBXHub HA architecture Converting an existing single-node PBXHub deployment to a High Availability (HA) architecture.
Downgrade from PBXhub HA to Single-node Transitioning from a High Availability PBXHub deployment to a single-node architecture.